- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material located in kitchen and prep area does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
|
12/15/2015 | Follow-up | |
- Critical: Equipment - Food Contact Surfaces, Nonfood Contact Surfaces, and Utensils* (corrected on site)
Observation: The following equipment food-contact surfaces were observed soiled to sight and touch: can opener and holder.
Correction: Clean and sanitize these surfaces for food contact.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the fan,oven tops,stove,dish machine and dough maker has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material located in kitchen and prep area does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor and walls in the kitchen noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
12/08/2015 | Routine | |
corrections to violations made
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the ceiling fan, ventilation hood and equipment tops has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material located at food prep area and kitchen does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor in the kitchen noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
06/10/2015 | Follow-up | |
- Critical: Food - Potentially Hazardous Food - Cold Holding* (corrected on site) (repeated violation)
Observation: Italian sausage, ham(sliced), Italian sausage(chunks), and ham(chunks) cold holding at improper temperatures
Correction: Relocate food to a refrigeration unit that is capable of maintaining food storage at 41°F or below or discard.
- Critical: Equipment - Food Contact Surfaces and Utensils (corrected on site) (repeated violation)
Observation: Food contact surfaces of the can opener used to prepare/store potentially hazardous food items were observed soiled with accumulations of food residues.
Correction: Clean food-contact surfaces of can opener no less than every 4 hours to prevent the growth microorganisms on those surfaces.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the ceiling fan, ventilation hood and equipment tops has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material located at food prep area and kitchen does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor in the kitchen noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
06/04/2015 | Routine | |
- Nonfood Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the wood is not designed or constructed to be easily cleanable.
Correction: Alter or replace this item to provide a surface that is free of unnecessary ledges, projections, and crevices.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the fan has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Floors, Walls, and Ceilings - Cleanability (repeated violation)
Observation: Ceiling and floor in food prep area is not smooth and easily cleanable.
Correction: Repair or replace ceiling to make it smooth and easily cleanable.
|
12/09/2014 | Routine | |
- Nonfood Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the gaskets on prep table is not designed or constructed to be easily cleanable.
Correction: Alter or replace this item to provide a surface that is free of unnecessary ledges, projections, and crevices.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material floor located at kitchen does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
|
07/07/2014 | Follow-up | |
- Nonfood Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the gaskets on prep table is not designed or constructed to be easily cleanable.
Correction: Alter or replace this item to provide a surface that is free of unnecessary ledges, projections, and crevices.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the hood, oven top, fly trap, dishwasher, fan has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material floor located at kitchen does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Floors, Walls, and Ceilings - Cleanability (repeated violation)
Observation: Ceiling and floor in kitchen is not smooth and easily cleanable.
Correction: Repair or replace ceiling to make it smooth and easily cleanable.
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor and ceiling in the kitchen noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
06/27/2014 | Follow-up | |
- Critical: Food - Potentially Hazardous Food - Cold Holding* (corrected on site)
Observation: Ham, Italian sausage, beef, pepperoni, and anchovy cold holding at improper temperatures
Correction: Relocate food to a refrigeration unit that is capable of maintaining food storage at 41°F or below or Time/Date.
- Critical: Time as a Public Health Control* (corrected on site) (repeated violation)
Observation: PHFs on back prep table for which time rather than temperature is being used as a control was not labeled or otherwise marked with a 4 hour cook, serve or discard by time.
Correction: Discard food that is not cooked and served or served if ready-to-eat within 4 hours from the point in time when the food is removed from temperature control. Clearly label or otherwise mark the food with a 4-hour cook-serve or serve by time.
- Nonfood Contact Surfaces
Observation: The nonfood contact surface of the gaskets on prep table is not designed or constructed to be easily cleanable.
Correction: Alter or replace this item to provide a surface that is free of unnecessary ledges, projections, and crevices.
- Warewashing Equipment, Determining Chemical Sanitizer Concentration (repeated violation)
Observation: A sanitizer test kit is not being used to ensure the chemical sanitizing solution(s) are at the proper concentration.
Correction: Use a chlorine chemical test kit to ensure the sanitizing solution is maintained at the proper solution.
- Critical: Equipment - Food Contact Surfaces and Utensils
Observation: Food contact surfaces of the can opener used to prepare/store potentially hazardous food items were observed soiled with accumulations of food residues.
Correction: Clean food-contact surfaces of can opener no less than every 4 hours to prevent the growth microorganisms on those surfaces.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the hood, oven top, fly trap, dishwasher, fan has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material floor located at kitchen does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Floors, Walls, and Ceilings - Cleanability
Observation: Ceiling and floor in kitchen is not smooth and easily cleanable.
Correction: Repair or replace ceiling to make it smooth and easily cleanable.
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor and ceiling in the kitchen noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
06/20/2014 | Routine | |
- Temperature Measuring Devices
Observation: There was no temperature measuring device located in the prep table.
Correction: Provide a temperature measuring device in all hot or cold holding equipment used to store potentially hazardous foods so that employees can routinely monitor the ambient air temperature.
- Warewashing Equipment, Determining Chemical Sanitizer Concentration
Observation: A sanitizer test kit is not being used to ensure the chemical sanitizing solution(s) are at the proper concentration.
Correction: Use a chlorine and quatenary ammonia chemical test kit to ensure the sanitizing solution is maintained at the proper solution.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the hoods and oven tops has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics (repeated violation)
Observation: The indoor ceiling material located at food prep area does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Physical Facilities in Good Repair
Observation: Ceiling is not maintained in good repair
Correction: Maintain physical facilities in good repair. Poor repair and maintenance compromises the functionality of the physical facilities.
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor and ceiling in the food prep area noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
12/11/2013 | Routine | |
- Critical: Time as a Public Health Control* (corrected on site)
Observation: Pizza ingredients for which time rather than temperature is being used as a control was not cooked, served or discarded by the expiration time as indicated on the package.
Correction: Discard food that is not cooked and served or served if ready-to-eat within 4 hours from the point in time when the food is removed from temperature control.
- Temperature Measuring Devices (repeated violation)
Observation: There was no temperature measuring device located in the prep table.
Correction: Provide a temperature measuring device in all hot or cold holding equipment used to store potentially hazardous foods so that employees can routinely monitor the ambient air temperature.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the fan and ovens has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Indoor Areas - Surface Characteristics
Observation: The indoor ceiling an floor material located at kitcen does not meet the standard of: 1. smooth, durable and easily cleanable 2. nonabsorbent
Correction: Refinish or replace the indoor ceiling at the area designated so it is: 1. smooth, durable and easily cleanable 2. nonabsorbent
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor in the kitchen noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
06/17/2013 | Routine | |
- Non-Food Contact Surfaces
Observation: The nonfood contact surface of the hood has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
|
01/08/2013 | Follow-up | |
- Nonfood Contact Surfaces
Observation: The nonfood contact surface of the counter top is not designed or constructed to be easily cleanable.
Correction: Alter or replace this item to provide a surface that is free of unnecessary ledges, projections, and crevices.
- Temperature Measuring Devices
Observation: There was no temperature measuring device located in the coolers.
Correction: Provide a temperature measuring device in all hot or cold holding equipment used to store potentially hazardous foods so that employees can routinely monitor the ambient air temperature.
- Non-Food Contact Surfaces (repeated violation)
Observation: The nonfood contact surface of the ovens,prep tables, and other equipment has accumulations of grime and debris.
Correction: Clean the surface at a frequency necessary to preclude accumulation of soil residues that become encrusted or attract insects and rodents.
- Floors, Walls, and Ceilings - Cleanability
Observation: Ceiling in food prep area is not smooth and easily cleanable.
Correction: Repair or replace ceiling to make it smooth and easily cleanable.
- Physical Facilities - Cleaning Frequency and Restrictions (repeated violation)
Observation: Floor in the food prep area noted in need of cleaning.
Correction: All floors, walls, and ceilings must be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
12/12/2012 | Routine | |
Restaurant representatives - add corrected or new information about Bella's Pizza, 872 East Main Street, Abingdon, VA 24210 »