| No violation noted during this evaluation. | 01/26/2016 | Routine |
| No violation noted during this evaluation. | 01/12/2015 | VCR |
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
|
12/31/2014 | Routine |
| No violation noted during this evaluation. | 12/18/2013 | VCR |
- Critical: PHF, Cold Holding - Potentially hazardous cold food shall be maintained at temperatures in accordance with the Food Code.
|
12/10/2013 | Routine |
| No violation noted during this evaluation. | 01/29/2013 | VCR |
- Critical: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils - Equipment food-contact surfaces and utensils chall be clean to sight and touch. (corrected on site)
- Sanitizing Solutions, Testing Devices - A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided.
- Critical: Chemical Sanitization - Temperature, pH, Concentration, and Hardness - A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation shall conform to the Food Code. (corrected on site)
|
01/24/2013 | Routine |
| No violation noted during this evaluation. | 01/12/2012 | VCR |
- Critical: RTE PHF, Date Marking - Refrigerated, ready-to-eat, potentially hazardous food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, in accordance with the Food Code. (corrected on site)
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
- Critical: Chemical Sanitization - Temperature, pH, Concentration, and Hardness - A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation shall conform to the Food Code. (corrected on site)
- Critical: PHF, Cold Holding - Potentially hazardous cold food shall be maintained at temperatures in accordance with the Food Code. (corrected on site)
|
01/10/2012 | Routine |
- Sanitizing Solutions, Testing Devices - A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided.
- Temperature Measuring Devices, Ambient Air and Water - Ambient air and water temperature measuring device that are scaled in Celsius or dually scaled in Celsius and Fahrenheit shall be designed to be easily readable and accurate to 1.5C in the intended range of use; Ambient air and water temperature measuring devices that are scaled only in Fahrenheit shall be accurate to 3F in the intended range of use.
|
01/24/2011 | Routine |
Restaurant representatives - add corrected or new information about Bowladrome, 220 Eastland Dr, Twin Falls, ID 83301 »