| No violation noted during this evaluation. | 03/24/2015 | Routine |
| No violation noted during this evaluation. | 05/12/2014 | VCR |
- Floors, Walls, and Ceilings - Except as specified under 6-201.14, the floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable, except that antislip floor coverings or applications may be used for safety reasons.
- Temperature Measuring Devices, Ambient Air and Water - Ambient air and water temperature measuring device that are scaled in Celsius or dually scaled in Celsius and Fahrenheit shall be designed to be easily readable and accurate to 1.5C in the intended range of use; Ambient air and water temperature measuring devices that are scaled only in Fahrenheit shall be accurate to 3F in the intended range of use.
- Critical: Reheating for Hot Holding - Potentially hazardous food or Ready-to-eat food shall be reheated for hot holding in accordance with the Food Code. (corrected on site)
- Critical: Demonstration - The Person in Charge shall demonstrate to the Regulatory Authority knowledge of food borne disease prevention, application of the HACCP principles, and the requirements of the Idaho Food Code (IFC). The Person in Charge shall demonstrate this knowledge by at least One of the following: A. Complying with IFC by not having any critical violations at the time of inspection. B. Being a certified food protection manager who has shown proficiency of required information through passing a test that is part of an Accredited Program. The approved programs in Idaho are: Certified Professional Food Manager (CPFM), National Registry of Food Service Professionals (NRFSP), ServSafe, Idaho online course, and the University of Idaho Extension course. C. Responding correctly to the inspector’s questions as they relate to the specific food operation.
|
03/27/2014 | Routine |
| No violation noted during this evaluation. | 03/12/2013 | Follow-Up |
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
- Critical: Demonstration - The Person in Charge shall demonstrate to the Regulatory Authority knowledge of food borne disease prevention, application of the HACCP principles, and the requirements of the Idaho Food Code (IFC). The Person in Charge shall demonstrate this knowledge by at least One of the following: A. Complying with IFC by not having any critical violations at the time of inspection. B. Being a certified food protection manager who has shown proficiency of required information through passing a test that is part of an Accredited Program. The approved programs in Idaho are: Certified Professional Food Manager (CPFM), National Registry of Food Service Professionals (NRFSP), ServSafe, Idaho online course, and the University of Idaho Extension course. C. Responding correctly to the inspector’s questions as they relate to the specific food operation.
- Sanitizing Solutions, Testing Devices - A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided.
- Critical: Cooling - Cooked potentially hazardous food shall be cooled in accordance with the Food Code. (corrected on site)
- Critical: RTE PHF, Date Marking - Refrigerated, ready-to-eat, potentially hazardous food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, in accordance with the Food Code.
- Food Storage - Food stored 6' off the floor in clean, dry location & not stored in prohibited areas.
- Critical: PHF, Cold Holding - Potentially hazardous cold food shall be maintained at temperatures in accordance with the Food Code. (corrected on site)
|
03/05/2013 | Routine |
- Critical: RTE PHF, Date Marking - Refrigerated, ready-to-eat, potentially hazardous food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, in accordance with the Food Code. (corrected on site)
- Wiping Cloths, Use Limitation - Cloths for spills used for only one purpose; Wet wiping cloths stored in sanitizer; Wet & dry cloths stored clean. (corrected on site)
|
02/21/2012 | Routine |
- Critical: Chemical Sanitization - Temperature, pH, Concentration, and Hardness - A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation shall conform to the Food Code. (corrected on site)
- Critical: RTE PHF, Date Marking - Refrigerated, ready-to-eat, potentially hazardous food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, in accordance with the Food Code.
|
02/25/2011 | Routine |
Restaurant representatives - add corrected or new information about Papa Kelseys, 3197 Kimberly Rd, Twin Falls, ID 83301 »