Welcome to City-Data.com Forum!
U.S. CitiesCity-Data Forum Index
Go Back   City-Data Forum > General Forums > Politics and Other Controversies
 [Register]
Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
View detailed profile (Advanced) or search
site with Google Custom Search

Search Forums  (Advanced)
Reply Start New Thread
 
Old 03-06-2012, 02:05 PM
 
Location: Texas
14,076 posts, read 20,520,451 times
Reputation: 7807

Advertisements

I went to NAPA today to purchase a filter wrench. The only ones they had were made in Taiwan, so I declined to buy one. Went right next door to Carquest and purchased one made in the USA. Difference in price? About a dollar.

Last week, I was in Walmart, no less, looking for a teflon coated skillet. The only one they had made in the USA was also the least expensive. All the rest were made in China and were a few dollars more. Guess which one I bought?

The point is that American made stuff is out there if you look for it. And, that imported crap isn't always the cheapest, which gives the lie to the old excuse that out-sourcing our jobs keeps prices down. BS. Too often, it just means higher profits.

Anybody else have some successes at buying American they'd like to share?
Reply With Quote Quick reply to this message

 
Old 03-06-2012, 02:09 PM
 
15,912 posts, read 20,188,547 times
Reputation: 7693
I bought a can of Duster to clean out my keyboard and it was made in the good 'ol USA....

It was $3.00 (US) more than a similar can manufactured in Canada but what the hay, gotta keep those illegal aliens employed....
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 02:12 PM
 
Location: New Jersey
12,755 posts, read 9,641,738 times
Reputation: 13169
About six months ago, I went to Bed, Bath, and Beyond to buy a clothes hamper.

They had two kinds, one made in china and one made in the USA.
They were both the same price.The chinese one was already falling apart on the shelf, before any actual use. It was poorly made.

The American one was strong and sturdy. It has even held up against one of my cats clawing it!

Of course, I bought the one made in America. I would have even if it had been twice the price of the chinese crap.
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 02:12 PM
 
9,848 posts, read 8,277,740 times
Reputation: 3296
I will not buy ever GM because they consfiscated the ownership from stock holders and gave it for no good reason to the unions that caused them to collapse.
Case by case basis IMO. We want to support American companies IF they are acting like American ones.
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 03:04 PM
 
Location: Chicagoland
41,325 posts, read 44,929,215 times
Reputation: 7118
I always look for Made in the USA products.

I was pleased last summer on our cross country trip to WA - we stopped at Yellowstone and Mt. Rushmore - they had tons of merchandise made in the US. In fact, I don't think they had any Chinese made products.

Last edited by sanrene; 03-06-2012 at 03:32 PM..
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 03:07 PM
 
2,401 posts, read 4,681,743 times
Reputation: 2193
Yah...
at a chinese restaurant... the owner even said... nowadays, hiring american is cheaper than hiring chinese.
Such is the state we are in.

Yah... I support proudly made in the good old USA!
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 03:16 PM
 
25,619 posts, read 36,677,590 times
Reputation: 23295
Understand what Made in the USA means:

Complying with the Made in USA Standard | BCP Business Center

Yeah that ought to clear things up
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 03:21 PM
 
9,855 posts, read 15,200,125 times
Reputation: 5481
I really couldn't care less about buying American.

I am going to buy whatever gives me the best quality for the best price, regardless of where it is made. This isn't 1965 any more. Globalization is here, get used to it.
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 03:24 PM
 
1,263 posts, read 1,170,814 times
Reputation: 341
Quote:
Originally Posted by stillkit View Post
I went to NAPA today to purchase a filter wrench. The only ones they had were made in Taiwan, so I declined to buy one. Went right next door to Carquest and purchased one made in the USA. Difference in price? About a dollar.

Last week, I was in Walmart, no less, looking for a teflon coated skillet. The only one they had made in the USA was also the least expensive. All the rest were made in China and were a few dollars more. Guess which one I bought?

The point is that American made stuff is out there if you look for it. And, that imported crap isn't always the cheapest, which gives the lie to the old excuse that out-sourcing our jobs keeps prices down. BS. Too often, it just means higher profits.

Anybody else have some successes at buying American they'd like to share?


Steve McQueen - Bullitt - YouTube

2002 Ford F-250 Super Duty SUPERCAB-LONG-XLT-7.3L DIESEL-LOW - YouTube

The Blairs: Armalite Rifle - YouTube

Wilson Combat Commercial - Larry Vickers & Ken Hackathorn - YouTube

smith & wesson M&P .40S&W review and shoot - YouTube

Kershaw Blur model 1670S30V: Knife Review - YouTube
Reply With Quote Quick reply to this message
 
Old 03-06-2012, 03:43 PM
 
3,948 posts, read 4,304,046 times
Reputation: 1277
Quote:
Originally Posted by stillkit View Post
I went to NAPA today to purchase a filter wrench. The only ones they had were made in Taiwan, so I declined to buy one. Went right next door to Carquest and purchased one made in the USA. Difference in price? About a dollar.

Last week, I was in Walmart, no less, looking for a teflon coated skillet. The only one they had made in the USA was also the least expensive. All the rest were made in China and were a few dollars more. Guess which one I bought?

The point is that American made stuff is out there if you look for it. And, that imported crap isn't always the cheapest, which gives the lie to the old excuse that out-sourcing our jobs keeps prices down. BS. Too often, it just means higher profits.

Anybody else have some successes at buying American they'd like to share?
I'm the same way and I think more and more people are becoming that way. I know that I have found some things less expensive that were made here, but I never took note of which. I have been wanting to start a list though. I think that the only thing it does is take away the myth that just because something is made overseas that it is saving American companies money.

The irony of me reading this thread right now is that I just got off the phone with an outsourced customer service about 5 minutes ago. That was not a pleasant example of taking business overseas. They could not understand a word or letter (as I had to spell out things) of what I said.
Reply With Quote Quick reply to this message
Please register to post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned.

Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.


Reply
Please update this thread with any new information or opinions. This open thread is still read by thousands of people, so we encourage all additional points of view.

Quick Reply
Message:


Over $104,000 in prizes was already given out to active posters on our forum and additional giveaways are planned!

Go Back   City-Data Forum > General Forums > Politics and Other Controversies

All times are GMT -6. The time now is 12:10 AM.

© 2005-2024, Advameg, Inc. · Please obey Forum Rules · Terms of Use and Privacy Policy · Bug Bounty

City-Data.com - Contact Us - Archive 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37 - Top