Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
Good morning everyone. It's time for chapter 18 of our story.
Thursday 8-21-08(Today is the 2 month anniversary of my posting this story on CD)
Today was the the first day all week that it was just Mike and I. We work the best when it is just the two of us. That's how we really like it because, as you all know, we're best friends.
We went down to the house and finished stubbing out the plumbing in the bathroom for the water heater. Then we were able to finish installing the smaller pieces of sheet rock in the bathroom. Mike hates installing all the smaller sections because it is very time consuming and it doesn't feel like you get anything done. After a lot of grumbling we "finally" finished the bathroom.
Next we started on the kitchen wall.
See now that looks like we are getting something done.
After we got that wall done Mike showed me how to spackle. This is how it is done. After the sheet rock is installed on the wall studs the seams have to be taped. Then you spread the sheet rock "mud"(very smelly stuff) on the tape and scrape off the excess. You also fill in all the screw holes with mud and scrape that off. Let it all dry about 12 hours, lightly sand it all, and then repeat the whole process 2 more times. So far we haven't done any sanding which means we have a ton of finish work left. Yuk!
While I was spackling, Mike was working on the transoms above the doors. We made extra work for ourselves by deciding to put the decorative glass above the doorways but I think Mike and I will be very happy with them. Mike had to cut 2x4's to make a frame for the glass and then he covered it all with sheet rock.
The bathroom transom is done.
The bedroom transom.
Now all we have left is the other bedroom transom. That's for another day.
Mike also finished working on the sheet rock for the angled wall that goes into the bedroom and we fixed the bedroom door.
This is everything we did today.
It was a very good day.
Friday- 8-22-08
This morning we went down to the house and started the electrical wiring for the dining area.
Mike likes to install wire for each room individually so that each room in the house has it's own circuit breaker. We run wire in all the outlets and switches. Then we run a wire for an overhead light in each room. After that all the wire goes back to the breaker box.
The front wall of the dining area is done.
Now we only have the living room to do.
After the wiring, we started to sheet rock the front wall. This is Mike using a jigsaw on the sheet rock to cut out the electrical boxes.
We finished most of the front wall today.
We had to stop and go to town. We had to pick up more insulation and also go to our other property to mow. A few hours later we made it back home. Yeah!
When we got home Mike's daughter, Nicole, stopped my with her son A.J.. She needed to borrow our compound miter saw so she could finish the trim in her bathroom. A.J. is 10 and really excited about the house. He can't wait to stay over. I briefly explained how the solar works and he was amazed and thought it was very cool that we have no electric bill.
After they left, Mike and I moved the kitchen base kitchen cabinets from the 2nd bedroom back into the kitchen. Mike is "really" tired of sheet rock so he wants to do something different. It is taking a long time for the 2 of us to do the sheet rock but we are saving about $45.00( so far we have bought 65 boards) per board for a professional to come in and hang and finish sheet rock.
We bought small plastic nail in protectors to put on the bottoms of my base cabinets.
We are putting these on because my cabinets aren't solid wood and this will protect the bottoms in case the floor ever gets wet. We got all the cabinets lined up and ready to install tomorrow.
Saturday- 8-23-08
This morning we started installing the base cabinets in the kitchen.
We installed 6 base cabinets and a utility cabinet. Then we moved on to the upper cabinets. We used the top of the utility cabinet as our marker for the top cabinets. We placed a 2x4 across the top of the utility cabinet and to the corner, made sure it was level, and screwed the 2x4 into the wall. This made it much easier to lift the cabinets up to the 2x4 and screw them in place.
Almost finished with the upper cabinets.
Later on we finished installing 16 cabinets. We still have one more for above the refrigerator but we have to wait.
Sunday- 8-24-08
It was nice walking into the house and seeing all the kitchen cabinets done. It kind of gives you a boost to see some type of finish work on the house.
We started off by installing 2 small 2x4' by the corner carousel cabinet.
This is in preparation for the installing the plywood on top of the base cabinets for my counter top. We used 2 sheets, 4x8, of 3/4 inch thick finished plywood. We measured the plywood and cut two pieces for each section of the counter.
The plywood is now 1 1/2 inches thick and ready for tile.
Some people like to use backer board for their counters but we never have and have never had any problems. As Mike likes to say, "If it ain't broke don't fix it".
Mike started the template for my kitchen sink. He then drew it onto the counter and used a jigsaw to cut a whole for my sink. This was a very slow process. While he was doing that I did a little more spackling. Mike says I did a good job and that I seem to have a knack for it. I think he just doesn't want to do it ha, ha. Actually I like spackling. Mike says I like a lot of weird jobs when we build. It's OK at least one of us does.
This is my sink and faucet installed. Of course we aren't hooked to water yet but it's in. It makes us feel better.
I love it. I haven't had a big sink in years. The motor home has a double sink which I hate because I can' fit my big pans in the sink when I wash dishes. I love to cook so I use a lot of bigger pans. I also hate the single lever faucets, again in the motor home. They are a pain to clean because the connections for the levers are really hard to clean "all around them".
Next we started on sheet rock again! I can't wait until we are done. At least we had a day away from doing sheet rock. We put up 4 smaller boards and called it quits. We decided to take the rest of the night off and kick some butt tomorrow.
Later on we took a ride on the 4-wheeler and on our way back up we saw a raccoon eating apples in one of the apple trees. I love raccoons. They are like little burglars with their masks. A cow was right below the tree where the raccoon was in hopes of a fallen apple. We watched them for awhile. It is amazing how many animals we have on this property. Must be all the apple trees. So now I have more competition for apples. The cows are eating all the apples they can reach and the raccoons are eating the higher apples. I better hurry and start picking.
That's all for now. We have a really busy week coming up. We are trying to paint the interior within a couple of weeks, get the flooring done, install the appliances, and do the counter top. We better start ordering everything.
I am glad you are all enjoying the story. Have a great day.
Will you be putting in a tankless water heater? My sister and brother-in-law went with a Rinnai unit, and love the ultra efficiency. They use a gas model. Heard the electric ones are not as reliable. http://wholehomecomfort.com/Rinnai_installed.jpg (broken link)
Y.L. : Good pics. When the bosses back is turned , try wet (Damp) sponge cloth smoothing on the dry wall nail screw Heads , seams, vs the messy Dry sand -paper -white dust powder mess. !
2) My brother -in -law with the battery pack in his new elelctric truck, Still encountered a few bad units in the middle of his group . Even with a electronic device between each battery (Equalizier)? after 4 months got a few bad or drained down units. NOt sure if like wall-paper need all the same Batch code or build date, but see what your storage / drain experience as weeks go by ?
. He added a Watt-hour meter as a record of charge being used .?
Keep pics coming.
Will you be putting in a tankless water heater? My sister and brother-in-law went with a Rinnai unit, and love the ultra efficiency. They use a gas model. Heard the electric ones are not as reliable. http://wholehomecomfort.com/Rinnai_installed.jpg (broken link)
We are thinking about it. We can't go with the Rinnai unit becuase even though it is a gas unit it still uses electricity for an electric ignition. That means for most people if you lose power you won't have hot water. It's the-same thing with today's gas stoves. They also have an electric ignition which means, for most people, when the electric goes out you can't cook. I was told it's a safety feature so I had to buy a special stove. Same goes for a tankless water heater if we get one it will have to be special order.
Split- So far so good. Mike is constantly checking batteries.
Hi Lisa,
I am now looking into tank less water heaters that run off solar. When I find which one doesn't use electric at all, I will forward you the info in DM.
We are thinking about it. We can't go with the Rinnai unit becuase even though it is a gas unit it still uses electricity for an electric ignition. That means for most people if you lose power you won't have hot water. It's the-same thing with today's gas stoves. They also have an electric ignition which means, for most people, when the electric goes out you can't cook. I was told it's a safety feature so I had to buy a special stove. Same goes for a tankless water heater if we get one it will have to be special order.
Split- So far so good. Mike is constantly checking batteries.
Lisa
Lisa, I look forward to your photos and progress every week. Don't know what I'll do when your home is completed. Keep up the good work.
On the electric ignition gas stove, when the power goes out I use a match to light the stove, no problem. Don't know about the heater though.
Lisa, I look forward to your photos and progress every week. Don't know what I'll do when your home is completed. Keep up the good work.
On the electric ignition gas stove, when the power goes out I use a match to light the stove, no problem. Don't know about the heater though.
That's great. What kind of stove do you have? Is it older? All I know is when I called GE and Whirlpool they said they don't have any new stoves without an electric ignite. They said it's a safety issue. I ended up buying a Premier stove. Count yourself lucky.
I'll have another story on Thursday. Thank you for continuing to watch our progress. I actually don't know what we are going to do all winter. We might have to save the closets and the ceiling for a cold weather project.
That's great. What kind of stove do you have? Is it older? All I know is when I called GE and Whirlpool they said they don't have any new stoves without an electric ignite. They said it's a safety issue. I ended up buying a Premier stove. Count yourself lucky.
I'll have another story on Thursday. Thank you for continuing to watch our progress. I actually don't know what we are going to do all winter. We might have to save the closets and the ceiling for a cold weather project.
Lisa
Lisa, I've had two GE stoves, both with electronic ignition, the old one was 18 years old and still going strong when I left that house, the new one just 8 months old, also electronic ignition, will light with a match if the power is out. The electronic ignition just replaces the old fashioned pilot and only serves to supply the spark that ignites the burners.
Perhaps when winter comes you could write a book on how to build an underground home. It's amazing how fast things are moving along with a crew of two.
Lisa, thanks so MUCH for your story!! I will add my two bits on the gas stove. They all have electric iginition, but when the power goes out, you can turn on the gas and light the stove just like in the old days. BUT, you can't run the oven, as it needs the electric to continuously be able to re-ignite to maintain the temp you have selected. But on the top, you can light it with a match and keep it running with the knob on just fine. No, not sure how that would work for you, you still need the electric to ignite the oven - but it sure can't be much electricity for a second now and then! Hope that helps!
Please register to post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned.
Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.
Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
Wet sponge vs Dry Sand ? -Battery pack ?
Lighting a gas stove
