Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
If it’s acrylic try a stiff bristle brush on a painters stick with warm very soapy water.
If oil based use the same bristle brush with some solvent. I prefer mineral spirits or believe it or not- white Coleman gas. It’ll evaporate in no time.
Try paint thinner and let it sit there for 30 minutes or so and if that doesn’t work, you could burn it off with a handheld propane torch or perhaps a heat gun.
If the painter is really good, and wants to maintain that status, he should come back and take care of it. But, if paid in full- probably down the road and doesn’t give a rat’s ass about your dilemma.
That almost looks like it was deliberate, with the expansion joint exactly in the middle.
That may not come off via pressure washer, if it’s got primer in it too. You might have the painter return to clean up their mess.
I’d refrain from using solvents/thinners or white gasoline. These could stain the concrete as it’s porous. You might be trading one mess for another.
Last ditch effort would be to get the area “polished.”
The Hell of it is, if someone had taken an ordinary garden hose to the paint while it was still wet, it would have been very easy to clean up.
Uh, no.
The "real" "HELL of it" is...
Why was there no drop cloth or plastic down wherever paint was???
Please register to post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned.
Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.