Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
I am hoping a builder or realtor with knowledge (or citation) can help.
I am looking to build a floating deck on my property, less than 30 inches off the ground and without poured concrete footings. The square footage will be conservative (around 200-250 sq/ft), will not be attached to any structures, have no electrical, and no railings.
I live in Wake Country (not within any city limits) and I can't seem to find any guidance - and calling has provided no direction either.
Thanks, K4GPB. I am pretty solid on building and materials. My question was more line line with what the building code/permit situation is for Wake County. I would prefer not to permit this, and from what I have read, I shouldn't have to. However, I want to make sure I conform with what my legal requirements are.
I am looking to build a floating deck on my property, less than 30 inches off the ground and without poured concrete footings. The square footage will be conservative (around 200-250 sq/ft), will not be attached to any structures, have no electrical, and no railings.
I live in Wake Country (not within any city limits) and I can't seem to find any guidance - and calling has provided no direction either.
I am pretty sure you will need a permit. For sheds, you can go up to 12x12 (144 sq ft) without a permit. I did a quick check and found this site, but nothing on size. https://www.wakegov.com/departments-...-deck-or-porch
Wake County can be pretty strict, especially when making sure the structure will not impact septic tanks/distribution lines. I ran into the dreaded Impervious Surface requirements when adding a garage. I now have to file an annual report on my "Cistern system" aka rain barrels.
I have found Wake County to be pretty response to emails. That also lets you keep a record of what you were told.
If you're in an HOA, don't forget to get their blessing IN WRITING.
Thanks, JKGourmet. Definitely, the HOA will be fully aware of this project with proper approval. It is just the Wake County Building department and subsequent code that are giving me issues.
Permit is likely required.....you can contact the inspections department for verification. Question is, why would you prefer not to permit? Not really a big deal if required. Depending on the size of your lot it could figure into the impervious calculation.
Permit is likely required.....you can contact the inspections department for verification. Question is, why would you prefer not to permit? Not really a big deal if required. Depending on the size of your lot it could figure into the impervious calculation.
The only reason is time delay. When I built a deck at my previous house it took months to get on the books, inspected and approved. Other than that, I don't mind the concept of needing it. We already were approved for the square footage regarding impervious surfaces - but definitely good thoughts, thanks.
Please register to post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned.
Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.
Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
