What power cord is needed? (monitor, universal, convert, computer)

[tankhead]

I have a Samson S-Mix 5 channel mixer, but I am missing the power cord. I tried buying a replacement power cord, but the DC plug does not fit. What is the size of the DC plug of the power cord for the Samson S-Mix 5 channel mixer?

[Thoreau424]

Why don't you look up the specs for that box, and see what it indicates? All we see is 18V (probably DC), and a round connector.

It needs to be the right connector size, right polarity, right voltage, and have sufficient current / amperage.

[EDS_]

Originally Posted by tankhead

I have a Samson S-Mix 5 channel mixer, but I am missing the power cord. I tried buying a replacement power cord, but the DC plug does not fit. What is the size of the DC plug of the power cord for the Samson S-Mix 5 channel mixer?

I'd call to verify but I'm pretty sure it's this. If you have a computer supply house close by they'll likely have something that will work.

Scratch that. I linked a 15VDC power supply not 18VDC.

Call Sweetwater and ask them what you need. I'm guessing you'd need 18VDC and very low amperage.

[gguerra]

This looks about right except it doesn't say S-Mix. It's best to get the right amperage and the plug has to fit so not positive on that.
https://reverb.com/item/46237901-sam...ntom-s-convert

Here's another one that may work except this one is 600ma. You can go slightly over on the amps without causing damage. It is however for a Mackie mixer, not Samson. You can call or email that company directly, they may have the exact one you need.
https://reverb.com/item/36994873-las...c-600ma-fx-m18

I would just get a universal and be done with it.
https://www.amazon.com/dp/B08BL4QMGM/

[tankhead]

Thanks everyone for all of your help.