Please register to participate in our discussions with 2 million other members - it's free and quick! Some forums can only be seen by registered members. After you create your account, you'll be able to customize options and access all our 15,000 new posts/day with fewer ads.
I would like to take out my non working garbage disposal and then NOT put in a new one. I can live without it, so my question is...how do I fix it up after I take out the garbage disposal. I have a two sink, the garbage disposal is on the left side of the split sink. What are the steps to take please.
You have to rework the drain and pipes to fit. it really does take a plumber if you do not understand the flow and drain commections. The easiest thing is to call a plumber. Get several estimates and go with who you feel is good for your job.
The easiest thing to do is to put a new disposal in. A basic model is not expensive (compared to the cost of a plumber). If the top part is the same (e.g. replacing Insinkerator with Insinkerator) it takes less than an hour.
Replacing the drain isn't so hard, if it's PVC. If it's metal, it's a pain, and you usually would replace everything up to and including the P-trap with PVC and then have a rubber adapter to the house drain.
Take pictures, go to a home store plumbing section and ask for help. Typically you redo everything under the sink with fresh materials. It ends up being a better job and easier. Be sure to ask for everything, including the sink drains and stoppers, traps and piping, small saw, the cleaner and glue, and a small tube of plumber's putty for "just in case" the drain fit isn't perfect with just the gasket.
Sink strainer basket, plumber's putty, a 1-1/2" sink drain trap kit, probably a little bit of PVC, or ABS, a couple of fittings, some glue, a saw, a little patience, and a whole lot of forethought as to how it's going to all go together.
Now, if that didn't burst your bubble post a couple of pics of the plumbing configuration as it is now and a few of us can explain how to "git-r-done!"
It might help you if you search for pictures of sink drain plumbing, so you'll have an idea of how it should look without a disposal. That way, you'll have an idea of what the parts look like.
If it leaves a hole the specific size of the disposal maybe the most expensive especially in matching the cabinets. Since its a specfic size I'd use the space to place a rollout trash can. The facing can be matched to cabinets doors or have one made that matches the appliances at metal shop.The door is not hinged but attached to the roll out trash can system. Basically you have a handle at top like a draw and you pull out and fake door comes out with trash can on rollout fixture.
If it leaves a hole the specific size of the disposal maybe the most expensive especially in matching the cabinets. Since its a specfic size I'd use the space to place a rollout trash can. The facing can be matched to cabinets doors or have one made that matches the appliances at metal shop.The door is not hinged but attached to the roll out trash can system. Basically you have a handle at top like a draw and you pull out and fake door comes out with trash can on rollout fixture.
IF you replace the disposal it will cost about $50 (if you shop around) and take you maybe 15 minutes. If you remove it it will probably requrie a plumber and cost $200 plus.
Maybe they make a bypass unit for people who want ot get rid of them. That should be eve cheaper than a disposal and just as easy to instal. Not sure if anyone makes one though. Google about.
Please register to post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned.
Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.