Inspection findings |
Inspection Type |
Inspection Date |
Inspection Score
(the higher the better) |
-
Lighting and ventilation inadquate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
-
Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's intructions
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
[multiple violations]
|
Regular
|
Dec 21, 2010
|
96 |
-
Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
-
Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
[multiple violations]
-
Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracksm open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
-
Food contact surfaces not washed, rinsed and sanitized after each use following any time of operations when contamination may have occurred
[multiple violations]
-
Lighting and ventilation inadquate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
-
Non-food contact surfaces of equipment not clean
[multiple violations]
|
Regular
|
Dec 23, 2010
|
86 |
|
No violation noted during this evaluation.
|
Follow-Up
|
Jan 13, 2011
|
100 |
-
Food not protected durng storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
-
Improper thawing procedures used
-
Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's intructions
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
[multiple violations]
-
Potentially hazardous foods are not cooled by an approved method where the food temerature can be reduced from 120 degrees (F) to 70 (F) or less within two hours and 70(F) to 45 (F) within four hours. (Potentially hazardous foods that are cooling may be uncovered during the cooling period) Actual Temperature, Time (hours)
|
Regular
|
Mar 11, 2011
|
94 |
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
-
Wiping clothes dirty, not stored properly in sanitizing solutions
|
Follow-Up
|
Mar 16, 2011
|
98 |
-
Effective measures not used to control entrance (rodent-, insect- proof construction). Harbage areas available for rodents, insects and other vermin
-
Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
[multiple violations]
-
Food contact surfaces not washed, rinsed and sanitized after each use following any time of operations when contamination may have occurred
-
Food not protected durng storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
[multiple violations]
-
Lighting and ventilation inadquate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
[multiple violations]
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
[multiple violations]
-
Non-food contact surfaces of equipment not clean
-
Plumbing and sinks not properly sizedd, installed, maintained; equipment and floors not properly drained
[multiple violations]
-
Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self- closing doors, missing hand wash signs
|
Regular
|
May 3, 2011
|
81 |
-
Effective measures not used to control entrance (rodent-, insect- proof construction). Harbage areas available for rodents, insects and other vermin
-
Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
[multiple violations]
-
Food contact surfaces not washed, rinsed and sanitized after each use following any time of operations when contamination may have occurred
-
Food from unwrapped source, spoiled, adulterated on premises
-
Food not protected durng storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
[multiple violations]
-
Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap and single service towels or hand drying devices missing
-
Improper use and storage of clean, sanatized equipment and utensils
-
Lighting and ventilation inadquate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
[multiple violations]
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
-
Non-food contact surfaces of equipment not clean
-
Plumbing and sinks not properly sizedd, installed, maintained; equipment and floors not properly drained
[multiple violations]
|
Regular
|
Dec 6, 2011
|
84 |
-
Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
[multiple violations]
-
Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracksm open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
Regular
|
Jan 4, 2012
|
97 |
-
Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
-
Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracksm open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
-
Lighting and ventilation inadquate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
-
Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equioment not readily accessible for cleaning, surfaces not smooth finish)
-
Prepared food products contact equipment or work surfaces which have had prior contact with faw foods and where washing and sanatizing of the food contact surface has not occurred to provent contamination
|
Regular
|
Mar 9, 2012
|
95 |
|
No violation noted during this evaluation.
|
Follow-Up
|
Apr 10, 2012
|
100 |
Restaurant representatives - add corrected or new information about TRINITY GRILL & BAR, 7 PURDY STREET, Harrison, NY 10528 »