- In use food dispensing utensils improperly stored
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
|
09/15/2015 | Inspection | |
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
04/14/2015 | Inspection | |
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non food contact surfaces of equipment not clean
- In use food dispensing utensils improperly stored
|
12/19/2014 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Adequate, leakproof, non-absorbent, vermin-proof, covered containers not provided where needed
|
03/03/2014 | Re-Inspection | |
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Improper use and storage of clean, sanitized equipment and utensils
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Non food contact surfaces of equipment not clean
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Adequate, leakproof, non-absorbent, vermin-proof, covered containers not provided where needed
|
02/24/2014 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Adequate, leakproof, non-absorbent, vermin-proof, covered containers not provided where needed
- Hair is improperly restrained
|
10/24/2013 | Inspection | |
| No violation noted during this evaluation. | 08/02/2013 | Inspection | |
- Tobacco is used; eating, drinking in food preparation, dishwashing food storage areas
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Hair is improperly restrained
|
03/06/2013 | Inspection | |
- Hair is improperly restrained
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
|
11/28/2012 | Inspection | |
- Hair is improperly restrained
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
|
08/03/2012 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Hair is improperly restrained
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
|
04/17/2012 | Re-Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Hair is improperly restrained
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
|
04/03/2012 | Inspection | |
- Premises littered, unnecessary equipment and article present, living quarters no completely separated for food service operations, live animals, birds and pets not excluded
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Garbage storage areas not properly constructed or maintained, creating a nuisance
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
|
12/05/2011 | Re-Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non food contact surfaces of equipment not clean
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
11/01/2011 | Inspection | |
| No violation noted during this evaluation. | 08/05/2011 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
01/18/2011 | Re-Inspection | |
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Insects, rodents present
|
01/11/2011 | Inspection | |
| No violation noted during this evaluation. | 08/06/2010 | Inspection | |
- Insects, rodents present
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Critical: Food from unapproved source, spoiled, adulterated on premises.
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Garbage storage areas not properly constructed or maintained, creating a nuisance
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
|
05/07/2010 | Inspection | Reviewed proper cooling requirements PH foods and recall on black pepper with operator. Go to website www.fda.gov1 for updates. |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
09/19/2009 | Inspection | Provided hand wash sign during this temp food event inspection. |
| No violation noted during this evaluation. | 08/01/2009 | Inspection | |
- Hair is improperly restrained
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
|
07/04/2009 | Inspection | Per operator request provided 9 hand wash signs. |
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
04/15/2009 | Re-Inspection | Old kitchen access found floor under construction and traffic to walk-in and ice machine in this area that is not approved to operate based on telephone discussion with Town of Union code office earlier today. |
- Miscellaneous, Economic Violation, Choking Poster, Training.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Critical: Foods or food area/public area contamination by sewage or drippage from waste lines.
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Non food contact surfaces of equipment not clean
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- In use food dispensing utensils improperly stored
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
|
04/07/2009 | Inspection | Called Town of Union code about the use of other areas currrently under construction. |
- Critical: Potentially hazardous foods are not kept at or below 45oF during cold holding, except smoked fish not kept at or below 38oF during cold holding.
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
08/03/2008 | Inspection | Provided operator with outdoor food event fact sheet and reviewed. |
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Critical: Potentially hazardous foods are not kept at or below 45oF during cold holding, except smoked fish not kept at or below 38oF during cold holding.
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Critical: Potentially hazardous foods are not kept at or above 140oF during hot holding.
|
07/04/2008 | Inspection | |
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Insects, rodents present
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
|
01/04/2008 | Re-Inspection | |
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Improper thawing procedures used
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
|
11/16/2007 | Re-Inspection | |
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Improper use and storage of clean, sanitized equipment and utensils
- Critical: Potentially hazardous foods are not kept at or above 140oF during hot holding.
- Critical: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
- Critical: Foods or food area/public area contamination by sewage or drippage from waste lines.
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Hair is improperly restrained
- Insects, rodents present
- Non food contact surfaces of equipment not clean
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
- In use food dispensing utensils improperly stored
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Critical: Precooked, refrigerated potentially hazardous food is not reheated to 165oF or above within two hours.
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
|
11/06/2007 | Inspection | |
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
|
08/03/2007 | Inspection | |
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non food contact surfaces of equipment not clean
|
02/05/2007 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Non food contact surfaces of equipment not clean
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
|
02/14/2006 | Re-Inspection | |
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Improper use and storage of clean, sanitized equipment and utensils
- Non food contact surfaces of equipment not clean
- Hot, cold running water not provided, pressure inadequate
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
|
02/06/2006 | Inspection | |
| No violation noted during this evaluation. | 11/16/2005 | Inspection | |
Restaurant representatives - add corrected or new information about Brothers 2, 2901 Watson Boulevard, Endwell, NY 13760 »