| No violation noted during this evaluation. | 12/01/2015 | Re-Inspection | establishment in process of cleaning ceiling |
- Pesticide application not supervised by a certified applicator
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Miscellaneous, Economic Violation, Choking Poster, Training.
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Non food contact surfaces of equipment not clean
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
|
11/17/2015 | Inspection | measured temperatures acceptable
**re-inspection to occur in or about 2 weeks |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
04/07/2015 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
|
12/04/2014 | Inspection | |
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
|
03/04/2014 | Inspection | |
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
|
11/06/2013 | Inspection | |
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
|
01/29/2013 | Inspection | |
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
|
04/18/2012 | Inspection | |
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
10/28/2011 | Inspection | |
- Improper thawing procedures used
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
|
04/19/2011 | Inspection | |
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
10/29/2010 | Inspection | |
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
04/30/2010 | Inspection | |
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
|
12/01/2009 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
- Single service items reused, improperly stored, dispensed, not used when required
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
|
04/07/2009 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
|
11/21/2008 | Inspection | |
| No violation noted during this evaluation. | 04/03/2008 | Inspection | |
- Critical: Food workers prepare raw and cooked or ready to eat food products without 'thorough handwashing and sanitary glove changing in between.
|
11/30/2007 | Re-Inspection | |
| No violation noted during this evaluation. | 11/26/2007 | Inspection | |
| No violation noted during this evaluation. | 11/21/2007 | Re-Inspection | |
| No violation noted during this evaluation. | 11/14/2007 | Inspection | |
| No violation noted during this evaluation. | 03/20/2007 | Re-Inspection | |
| No violation noted during this evaluation. | 02/20/2007 | Inspection | |
| No violation noted during this evaluation. | 11/13/2006 | Inspection | |
| No violation noted during this evaluation. | 11/22/2005 | Inspection | |
Restaurant representatives - add corrected or new information about Gordy's Steakhouse, 502 A New Rochelle Road, Bronxville, NY 10708 »