- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
|
08/28/2015 | Inspection | |
- Critical: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
|
11/19/2014 | Inspection | |
- Critical: Food from unapproved source, spoiled, adulterated on premises.
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
|
11/21/2013 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- In use food dispensing utensils improperly stored
|
10/18/2012 | Inspection | |
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
|
12/06/2011 | Inspection | |
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Critical: Food from unapproved source, spoiled, adulterated on premises.
|
12/09/2010 | Inspection | |
- Critical: Potentially hazardous foods are not cooled by an approved method where the food temperature can be reduced from 120oF to 70oF or less within two hours and 70oF to 45oF within four hours.
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
06/12/2008 | Re-Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Critical: Cooked or prepared foods are subject to cross-contamination from raw foods.
- Critical: Food from unapproved source, spoiled, adulterated on premises.
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Non food contact surfaces of equipment not clean
- Critical: Accurate thermometers not available or used to evaluate potentially hazardous food temperatures during cooking, cooling, reheating and holding.
- Single service items reused, improperly stored, dispensed, not used when required
|
05/28/2008 | Inspection | |
- Critical: Cooked or prepared foods are subject to cross-contamination from raw foods.
- In use food dispensing utensils improperly stored
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Improper use and storage of clean, sanitized equipment and utensils
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
|
05/17/2007 | Inspection | |
Restaurant representatives - add corrected or new information about Moose Lodge, Bing. #1013, 224 Henry Street, Binghamton, NY 13901 »