No violation noted during this evaluation. | 10/08/2015 | Inspection | |
No violation noted during this evaluation. | 04/01/2015 | Inspection | |
- Non food contact surfaces of equipment not clean
|
10/15/2014 | Inspection | |
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
02/21/2014 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
10/09/2013 | Inspection | |
- Non food contact surfaces of equipment not clean
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
03/08/2013 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
|
11/01/2012 | Inspection | |
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
|
02/28/2012 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Non food contact surfaces of equipment not clean
|
10/06/2011 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Non food contact surfaces of equipment not clean
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Improper use and storage of clean, sanitized equipment and utensils
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Garbage storage areas not properly constructed or maintained, creating a nuisance
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
|
01/28/2011 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Single service items reused, improperly stored, dispensed, not used when required
- Wiping cloths dirty, not stored properly in sanitizing solutions
- Non food contact surfaces of equipment not clean
|
08/13/2010 | Inspection | |
- Garbage storage areas not properly constructed or maintained, creating a nuisance
- Improper use and storage of clean, sanitized equipment and utensils
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- In use food dispensing utensils improperly stored
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
02/09/2010 | Inspection | Provided and reviewed cooling requirements for PH foods and provided chef with the food fact sheet and ill food worker policy and 4 hand washing signs. |
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Non food contact surfaces of equipment not clean
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Garbage storage areas not properly constructed or maintained, creating a nuisance
- In use food dispensing utensils improperly stored
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Improper use and storage of clean, sanitized equipment and utensils
|
03/17/2009 | Inspection | Provided 5 hand washing signs and reviewed food fact sheet with operator and provided a copy to them. |
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
04/22/2008 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
|
08/24/2007 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
|
01/25/2007 | Inspection | |
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Improper use and storage of clean, sanitized equipment and utensils
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
|
01/25/2006 | Inspection | |
- Non food contact surfaces of equipment not clean
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
10/18/2005 | Inspection | |
Restaurant representatives - add corrected or new information about Binghamton Club, 83 Front Street, Binghamton, NY 13905 »