No violation noted during this evaluation. | 01/05/2015 | Follow-up |
- Critical: Good Repair and Calibration
- Items:
- Food thermometer(s)
- Problems:
- Not calibrated
- Corrections:
- Calibrate in accordance with manufacturer specifications.
- Comment:
- Observed inaccurate food thermometer. Thermometers must be calibrated. Calibrate as needed to insure accuracy.
- General violation description:
- 4-502.11 - (A) UTENSILS shall be maintained in a state of repair or condition that complies with the requirements specified under Parts 4-1 and 4-2 or shall be discarded. (B) FOOD TEMPERATURE MEASURING DEVICES shall be calibrated in accordance with manufacturer's specifications as necessary to ensure their accuracy. (Pf) (C) Ambient air temperature, water pressure, and water TEMPERATURE MEAURING DEVICES shall be maintained in good repair and be accurate within the intended range of use.
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed mold on walls behind the dishmachines and dust on the ceiling vent in kitchen, floor under fryer and in walk-in freezer are dirty. Facilities must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed ice build-up on condenser in the produce walk-in cooler. Equipment must be maintained. Defrost the condenser to remove the ice.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing sign for the small hall bar handsink. Provide a handwashing sign.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed grease build-up in fryer behind the panel door. Non-food contact surfaces must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Repairing
- Items:
- Physical facilities
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed damaged ceiling above the food prep cooler across from pizza ovens. Facilities must be maintained. Repair the damaged ceiling.
- General violation description:
- 6-501.11 - PHYSICAL FACILITIES shall be maintained in good repair.
- System Maintained in Good Repa
- Items:
- Plumbing system
- Problems:
- Not maintained
- Corrections:
- Maintain in good repair
- Comment:
- Observed wastewater backing up on floors of the kitchen and small hall bar when water is run. Hot water shut off to the right handsink in the men's room for banquet hall. Plumbing must be maintained. Repair the clogged drains and provide hot water for the handsink.
- General violation description:
- 5-205.15 - A PLUMBING SYSTEM shall be: (A) Repaired according to LAW
- Temperature Measuring Devices
- Items:
- Thermometer(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no thermometer in the 3 door cooler across from stovetop. Provide a conspicuous thermometer in this cooler.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
|
12/22/2014 | Routine |
- Critical: Good Repair and Calibration
- Items:
- Food thermometer(s)
- Problems:
- Not calibrated
- Corrections:
- Calibrate in accordance with manufacturer specifications.
- Comment:
- Observed inaccurate metal stem food thermometer. Thermometers must be calibrated. This thermometer was calibrated in my presence. Violation corrected.
- General violation description:
- 4-502.11 - (A) UTENSILS shall be maintained in a state of repair or condition that complies with the requirements specified under Parts 4-1 and 4-2 or shall be discarded. (B) FOOD TEMPERATURE MEASURING DEVICES shall be calibrated in accordance with manufacturer's specifications as necessary to ensure their accuracy. (Pf) (C) Ambient air temperature, water pressure, and water TEMPERATURE MEAURING DEVICES shall be maintained in good repair and be accurate within the intended range of use.
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed soiled walls behind the two dishmachines and in the hall walk-in cooler. Facilities must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed heavy ice build-up in the walk-in freezer. Defrost the freezer to remove the ice.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed heavy build-up of grease behind the panel door of the fryer. Non-food contact equipment must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Repairing
- Items:
- Physical facilities
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed peeling paint on floor and door of produce walk-in cooler. Facilities must be maintained. Repair or replace the cooler to provide smooth and easily cleanable surfaces.
- General violation description:
- 6-501.11 - PHYSICAL FACILITIES shall be maintained in good repair.
|
07/02/2014 | Routine |
No violation noted during this evaluation. | 01/02/2014 | Follow-up |
- Critical: Equipment, Food-Contact Surfac
- Items:
- Food-contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed dried food debris on the can opener blade and holder. Food contact equipment must be kept clean. Clean to sight and touch on a daily basis.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Critical: Equipment, Food-Contact Surfac
- Items:
- Food-contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed dried food debris on the can opener blade and holder. Food contact equipment must be kept clean. Clean to sight and touch on a daily basis.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed the following soiled items: toilet, handsink, door and walls in the employee restroom, floor under the seasoning storage shelves, moldy walls behind the two dishmachines. Physical facilities must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed the following soiled items: toilet, handsink, door and walls in the employee restroom, floor under the seasoning storage shelves, moldy walls behind the two dishmachines. Physical facilities must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing sign for the front dishroom handsink. Provide a handwashing sign.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing sign for the front dishroom handsink. Provide a handwashing sign.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed grease on fryer behind the panel door. Non-food contact equipment must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed grease on fryer behind the panel door. Non-food contact equipment must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Repairing
- Items:
- Physical facilities
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed peeling paint on the produce walk-in cooler door and floor. Repair the door and floor to provide smooth and easily cleanable surfaces.
- General violation description:
- 6-501.11 - PHYSICAL FACILITIES shall be maintained in good repair.
- Repairing
- Items:
- Physical facilities
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed peeling paint on the produce walk-in cooler door and floor. Repair the door and floor to provide smooth and easily cleanable surfaces.
- General violation description:
- 6-501.11 - PHYSICAL FACILITIES shall be maintained in good repair.
|
12/11/2013 | Routine |
- Critical: Temperature Measuring Devices,
- Items:
- Thermometer(s)
- Problems:
- Not accurate
- Corrections:
- Calibrate to requirement above.
- Comment:
- Observed inaccurate metal stem thermometer. Metal stem thermometers must be accurate. The thermometer was calibrated in my presence. Violation corrected.
- General violation description:
- 4-203.11 - (A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1°C in the intended range of use. (Pf) (B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2°F in the intended range of use. (Pf)
- Critical: Temperature Measuring Devices,
- Items:
- Thermometer(s)
- Problems:
- Not accurate
- Corrections:
- Calibrate to requirement above.
- Comment:
- Observed inaccurate metal stem thermometer. Metal stem thermometers must be accurate. The thermometer was calibrated in my presence. Violation corrected.
- General violation description:
- 4-203.11 - (A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1°C in the intended range of use. (Pf) (B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2°F in the intended range of use. (Pf)
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Greasy
- Corrections:
- Keep clean.
- Comment:
- Observed grease on floor under the fryer. Clean the floor to sight and touch.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Greasy
- Corrections:
- Keep clean.
- Comment:
- Observed grease on floor under the fryer. Clean the floor to sight and touch.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed loose right lid on the pizza prep cooler. Repair lid so it has a tight fit.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed loose right lid on the pizza prep cooler. Repair lid so it has a tight fit.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing signs for the men's room in restaurant or the dishroom handsink. Provide handwashing signs for each of these handsinks.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing signs for the men's room in restaurant or the dishroom handsink. Provide handwashing signs for each of these handsinks.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed grease behind the panel door of the fryer. Clean the fryer to sight and touch.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed grease behind the panel door of the fryer. Clean the fryer to sight and touch.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Outer Openings, Protected
- Items:
- Outer opening(s)
- Problems:
- Not sealed to prevent pest entry
- Corrections:
- Seal to prevent pest entry.
- Comment:
- Observed gap at bottom of back door. Install weatherstrip on bottom of back door to prevent entry of pests.
- General violation description:
- 6-202.15 - (A) Except as specified in ## (B), (C), and (E) and under # (D) of this section, outer openings of a FOOD ESTABLISHMENT shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
- Outer Openings, Protected
- Items:
- Outer opening(s)
- Problems:
- Not sealed to prevent pest entry
- Corrections:
- Seal to prevent pest entry.
- Comment:
- Observed gap at bottom of back door. Install weatherstrip on bottom of back door to prevent entry of pests.
- General violation description:
- 6-202.15 - (A) Except as specified in ## (B), (C), and (E) and under # (D) of this section, outer openings of a FOOD ESTABLISHMENT shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
|
06/14/2013 | Routine |
- Critical: Manual and Mechanical Warewash
- Items:
- Chlorine solution concentration
- Problems:
- Below 25 ppm
- Corrections:
- Provide correct concentration as stated above.
- Comment:
- NO SANITIZER DETECTED AT VISIT.......PROVIDE 50-100PPM SANITATION RINSE OPERATOR TO USE THE FRONT DISHWASHER ONLY UNTIL SERVICE.
- General violation description:
- 4-501.114 - A chemical SANITIZER used in a SANITIZING solution for a manual or mechanical operation at exposure times specified under 4-703.11(C) shall be listed in 21 CFR 178.1010 Sanitizing solutions, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall be used as follows: (A) A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart
- Critical: Warewashing Equipment, Determi
- Items:
- Sanitizer test kit
- Problems:
- Not used
- Corrections:
- Use test kit to verify sanitizer concentration.
- General violation description:
- 4-501.116 - Concentration of the SANITIZING solution shall be accurately determined by using a test kit or other device.(Pf)
|
12/12/2012 | Routine |
No violation noted during this evaluation. | 06/18/2012 | Routine Inspection |
- Critical: Warewashing Chem.San., Temp/pH
- Comment:
- DISHWASHER IS DISPENSING 50-100PPM
- General violation description:
- 4-501.114 - A chemical SANITIZER used in a SANITIZING solution for a manual or mechanical operation at exposure times specified under 4-703.11(C) shall be listed in 21 CFR 178.1010 Sanitizing solutions, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall be used as follows: (A) A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart
|
01/13/2012 | Follow-up |
- Critical: Warewashing Chem.San., Temp/pH
- Comment:
- DISHWASHER WAS NOT DISPENSING SANITIZER AT TIME OF VISIT. OPERATOR WILL CALL SERVICE AND USE THE OTHER OPERATING DISHWASHER UNTIL REPAIRED.
- General violation description:
- 4-501.114 - A chemical SANITIZER used in a SANITIZING solution for a manual or mechanical operation at exposure times specified under 4-703.11(C) shall be listed in 21 CFR 178.1010 Sanitizing solutions, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall be used as follows: (A) A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart
- Determining Chem.San.Concentra
- Comment:
- PROVIDE CHLORINE TEST STRIPS TO MONITOR SANITIZER CONCENTRATION.
- General violation description:
- 4-501.116 - Concentration of the SANITIZING solution shall be accurately determined by using a test kit or other device.(Pf)
|
12/15/2011 | Routine Inspection |
- Temperature Measuring Devices
- Comment:
- REPLACE BROKEN COOLER THERMOMETER IN REACH IN COOLER.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
|
06/03/2011 | Routine Inspection |
- Critical: Warewashing Chem.San., Temp/pH
- Comment:
- CORRECTED. BOTH DISH MACHINES PROVIDING 50 TO 100PPM CHLORINE.
- General violation description:
- 4-501.114 - A chemical SANITIZER used in a SANITIZING solution for a manual or mechanical operation at exposure times specified under 4-703.11(C) shall be listed in 21 CFR 178.1010 Sanitizing solutions, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall be used as follows: (A) A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart
|
11/11/2010 | Follow-up |
- Critical: Warewashing Chem.San., Temp/pH
- Items:
- Chlorine solution concentration
- Problems:
- Below 50 ppm
- Corrections:
- Provide correct concentration as stated above.
- Comment:
- OBSERVED FRONT DISH MACHINE AT 0PPM AFTER RUN A FEW TIMES. CHEF PRIMED SANITIZER AND RAN DISH MACHINE AND GOT IT TO READ BETWEEN 50 TO 100PPM. OBSERVED BACK DISH MACHINE AT 0PPM AFTER RUN A FEW TIMES, NEW SANITIZER BUCKET INSTALLED AND PRIMED. DISH MACHINE SHALL BE SANITIZING BETWEEN 50 TO 100PPM CHLORINE. REPAIR DISH MACHINE(S) TO PROVIDE 50 TO 100PPM.,
- General violation description:
- 4-501.114 - A chemical SANITIZER used in a SANITIZING solution for a manual or mechanical operation at exposure times specified under 4-703.11(C) shall be listed in 21 CFR 178.1010 Sanitizing solutions, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall be used as follows: (A) A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart
- Clean Freq, Nonfood-Contact Su
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- WALL BY BACK DISH MACHINE SOILED, WALL AT 2-COMPARTMENT PREP SINK SOILED, WALL BY HANDSINK BY FRONT DISH MACHINE SOILED. CLEAN AND KEEP CLEAN.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
|
11/03/2010 | Routine Inspection |
- Clean Freq, Nonfood-Contact Su
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- DELFIELD 2-DOOR SALAD COOLER SHELVES ARE SOILED AND RUSTY - CLEAN AND PAINT TO MAKE SMOOTH AND EASILY CLEANABLE. CAN OPENER AREA HAS DEBRIS - CLEAN TO PREVENT ANY CONTAMINATION OF FOOD. WALK-IN COOLER CONDENSER FANS DUSTY - CLEAN.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
|
05/03/2010 | Routine Inspection |
- Critical: Clean Sight/Touch-No Accum/Enc
- Items:
- Food-contact surface(s) Equipment
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- CORRECTED. EMPLOYEE THOROUGHLY CLEANED AND SANITIZED SLICER., SLICER HAD OLD GREASE BUILD UP BY INSIDE GUARD AND ALSO ON BLADE ITSELF. MUST CLEAN AND SANITIZE COMPLETELY AFTER USE.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Clean Freq, Nonfood-Contact Su
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- SHELF ABOVE SOUP HOLDING AREA IS DUSTY, LIGHT SHIELDS ABOVE PIZZA OVEN DUSTY, PREP TABLE ACROSS FROM BREAD OVEN SOILED BOTTOM SHELF, BREAD HOLDER HAS DEBRIS ON BOTTOM, CONTAINERS ON SHELF ABOVE MAIN PREP TABLE ARE SOILED (TUB WITH INDIVIDUAL CONTAINERS, TUB OF NUT MIX, TUB OF CANOLI SHELLS), VENT ABOVE MAIN PREP IS DUSTY, DOUGH MIXER HAS SOME DEBRIS, BACK KITCHEN AREA HANDSINK BY DOUGH MIXER IS HEAVILY SOILED IN SINK AND ON HANDLES, 2-DOOR DELFIELD COOLER HAS DEBRIS ON WIRE SHELVES AND THEY ARE RUSTY. CLEAN ALL AND KEEP CLEAN. WIRE SHELVES IN PREP COOLER - RECOAT OR REPLACE SHELVES TO BE SMOOTH.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Light Bulbs, Protective Shield
- Items:
- Light shielding
- Problems:
- Not provided
- Corrections:
- Provide adequate light shields and end caps or shatter-proof bulbs.
- Comment:
- PRODUCE WALK-IN COOLER LIGHT SHIELD HAS BEEN MELTED AND HAS A HOLE - REPLACE SHIELD. POP BOX ROOM LIGHT BULB DOES NOT HAVE SHIELD - PROVIDE.
- General violation description:
- 6-202.11 - (A) Except as specified in # (B) of this section, light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed FOOD
|
11/02/2009 | Routine Inspection |
Restaurant representatives - add corrected or new information about Corsis Restaurant, 27910 Seven Mile, Livonia, MI 48152 »