| No violation noted during this evaluation. | 08/31/2015 | Inspection | |
- In use food dispensing utensils improperly stored
- Miscellaneous, Economic Violation, Choking Poster, Training.
- Wiping cloths dirty, not stored properly in sanitizing solutions
|
11/17/2014 | Inspection | |
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
|
11/05/2013 | Inspection | |
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Improper use and storage of clean, sanitized equipment and utensils
|
09/17/2012 | Inspection | |
- Critical: Potentially hazardous foods are not kept at or above 140oF during hot holding.
- Improper use and storage of clean, sanitized equipment and utensils
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Handwashing facilities inaccessible, improperly located, dirty, in disrepair, improper fixtures, soap, and single service towels or hand drying devices missing
|
12/01/2011 | Inspection | |
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Non food contact surfaces of equipment not clean
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
|
09/30/2010 | Re-Inspection | |
- Critical: Potentially hazardous foods are not kept at or above 140oF during hot holding.
- Critical: Enough hot holding equipment is not present, properly designed, maintained and operated to keep hot foods above 140oF.
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Non food contact surfaces of equipment not clean
- Improper thawing procedures used
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Food not protected during storage, preparation, display, transportation and service, from potential sources of contamination (e.g., food uncovered, mislabeled, stored on floor, missing or inadequate sneeze guards, food containers double stacked)
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Single service items reused, improperly stored, dispensed, not used when required
|
09/01/2010 | Inspection | Operator to call when Hatco unit is corrected within 30 days as agreed to per operator. |
- Manual facilities inadequate, technique incorrect; mechanical facilities not operated in accordance with manufacturer's instructions
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- In use food dispensing utensils improperly stored
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Critical: Toxic chemicals are improperly labeled, stored or used so that contamination of food can occur.
|
03/25/2009 | Inspection | |
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Food contact surfaces not washed, rinsed and sanitized after each use and following any time of operations when contamination may have occurred
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Critical: Canned foods found in poor conditions (leakers, severe dents, rusty, swollen cans)
|
04/03/2008 | Inspection | |
- Toilet facilities inadequate, inconvenient, dirty, in disrepair, toilet paper missing, not self-closing doors, missing hand wash signs
- Hair is improperly restrained
|
02/26/2007 | Re-Inspection | |
- Non-food contact surfaces and equipment are improperly designed, constructed, installed, maintained (equipment not readily accessible for cleaning, surface not smooth finish)
- Accurate thermometers not available or used to evaluate refrigerated or heated storage temperatures
- Critical: Potentially hazardous foods are not kept at or above 140oF during hot holding.
- Effective measures not used to control entrance (rodent-, insect-proof contruction). Harborage areas available for rodents, insects and other vermin
- Food (ice) contact surfaces are improperly designed, constructed, installed, located (cracks, open seams, pitted surfaces, tin cans reused, uncleanable or corroded food contact surfaces)
- Plumbing and sinks not properly sized, installed, maintained; equipment and floors not properly drained
- Insects, rodents present
|
02/01/2007 | Inspection | |
- Lighting and ventilation inadequate, fixtures not shielded, dirty ventilation hoods, ductwork, filters, exhaust fans
- Floors, walls, ceilings, not smooth, properly constructed, in disrepair, dirty surfaces
|
03/15/2006 | Inspection | |
Restaurant representatives - add corrected or new information about American Food & Vending At Bcc, 907 Upper Front Street Street, Binghamton, NY 13905 »