| No violation noted during this evaluation. | 06/08/2015 | Follow-up |
- Critical: Equipment, Food-Contact Surfac
- Items:
- Food-contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed soiled can opener blade and holder. Food contact equipment must be kept clean. Clean to sight and touch on a daily basis.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Critical: Sanitizing Solutions, Testing
- Items:
- Sanitizer test kit
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no chlorine test kit for checking the sanitizer in the 3 compartment sink. Provide a chlorine test kit.
- General violation description:
- 4-302.14 - A test kit or other device that accurately measures the concentration in MG/L of SANITIZING solutions shall be provided. (Pf)
- Cleaning Ventilation Systems,
- Items:
- Ventilation system
- Problems:
- Not clean
- Corrections:
- Keep clean
- Comment:
- Observed dirty baffle filters, exhaust hood wallls, and fire suppression system. Ventilation equipment must be kept clean. Clean to sight and touch as needed.
- General violation description:
- 6-501.14 - (A) Intake and exhaust air ducts shall be cleaned and filters changed so they are not a source of contamination by dust, dirt, and other materials. (B) If vented to the outside, ventilation systems may not create a public health HAZARD or nuisance or unLAWful discharge.
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed soiled floor and drain bowl under the 3 compartment sink and soiled door handles and light switch in the restroom. Facilities must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed soiled interior of the salad prep cooler. Non-food contact areas of equipment must be kept clean. Clean to sight and touch as needed.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- System Maintained in Good Repa
- Items:
- Plumbing system
- Problems:
- Not maintained
- Corrections:
- Maintain in good repair
- Comment:
- Observed leaking faucets on the 3 compartment sink. Plumbing must be maintained. Repair or replace the faucets to remove the leaks.
- General violation description:
- 5-205.15 - A PLUMBING SYSTEM shall be: (A) Repaired according to LAW
- Temperature Measuring Devices
- Items:
- Thermometer(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no thermometer in the salad prep cooler. Provide a conspicuous thermometer in this cooler.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
|
01/29/2015 | Routine |
- Critical: Packaged and Unpackaged Food -
- Items:
- Raw animal food(s)
- Problems:
- Stored over/next to Ready-to-eat food(s)
- Corrections:
- Store raw animal foods below and away from foods needing little or no further prep.
- Comment:
- REACH-IN COOLER HAD CARTON OF RAW EGGS AND CONTAINER OF RAW SAUSAGE STORED WITH AND ABOVE READY TO EAT FOODS. STORE THSEE ITEMS BELOW AND AWAY FROM READY TO EAT FOODS., CORRECTED BY MOVING EGGS AND SAUASAGE TO BOTOTM SHELF AWAY FROM READY TO EAT FOODS.
- General violation description:
- 3-302.11 - (A) FOOD shall be protected from cross contamination by: (1) Separating raw animal FOODS during storage, preparation, holding, and display from: (a) Raw READY-TO-EAT FOOD including other raw animal FOOD such as FISH for sushi or MOLLUSCAN SHELLFISH, or other raw READY-TO-EAT FOOD such as vegetables, and (b) Cooked READY-TO-EAT FOOD
- Critical: Packaged and Unpackaged Food -
- Items:
- Raw animal food(s)
- Problems:
- Stored over/next to Ready-to-eat food(s)
- Corrections:
- Store raw animal foods below and away from foods needing little or no further prep.
- Comment:
- REACH-IN COOLER HAD CARTON OF RAW EGGS AND CONTAINER OF RAW SAUSAGE STORED WITH AND ABOVE READY TO EAT FOODS. STORE THSEE ITEMS BELOW AND AWAY FROM READY TO EAT FOODS., CORRECTED BY MOVING EGGS AND SAUASAGE TO BOTOTM SHELF AWAY FROM READY TO EAT FOODS.
- General violation description:
- 3-302.11 - (A) FOOD shall be protected from cross contamination by: (1) Separating raw animal FOODS during storage, preparation, holding, and display from: (a) Raw READY-TO-EAT FOOD including other raw animal FOOD such as FISH for sushi or MOLLUSCAN SHELLFISH, or other raw READY-TO-EAT FOOD such as vegetables, and (b) Cooked READY-TO-EAT FOOD
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Not clean
- Corrections:
- Keep clean
- Comment:
- BATHROOM INSIDE DOOR BY HANDLE AND AT LIGHTSWITCH AR HEAVILY SOILED. CLEAN AND KEEP CLEAN.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Not clean
- Corrections:
- Keep clean
- Comment:
- BATHROOM INSIDE DOOR BY HANDLE AND AT LIGHTSWITCH AR HEAVILY SOILED. CLEAN AND KEEP CLEAN.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- System Maintained in Good Repa
- Items:
- Plumbing system water line(s)
- Problems:
- Not maintained
- Corrections:
- Maintain in good repair
- Comment:
- ALL 3 FAUCETS OF 3-COMPARTMENT SINK LEAK AT HANDLES. REPAIR ALL FAUCETS/HANDLES SO THE DO NOT LEAK.
- General violation description:
- 5-205.15 - A PLUMBING SYSTEM shall be: (A) Repaired according to LAW
- System Maintained in Good Repa
- Items:
- Plumbing system water line(s)
- Problems:
- Not maintained
- Corrections:
- Maintain in good repair
- Comment:
- ALL 3 FAUCETS OF 3-COMPARTMENT SINK LEAK AT HANDLES. REPAIR ALL FAUCETS/HANDLES SO THE DO NOT LEAK.
- General violation description:
- 5-205.15 - A PLUMBING SYSTEM shall be: (A) Repaired according to LAW
|
01/24/2014 | Routine |
| No violation noted during this evaluation. | 01/14/2013 | Routine Inspection |
- Critical: Responsibility of Person in Ch
- Items:
- Person-in-charge
- Locations:
- Employee(s)
- Problems:
- Fail to require employees to report illness as rule requires
- Corrections:
- Require reporting as stated above.
- Comment:
- Observed the employee(s) present were not fully aware of the names of the big 5: S ALMONELLA TYPHI, H EPATITIS "A" VIRUS, E SCHERICHIA COLI ("E-COLI"), SHIGELLA, NORO VIRUS The signs and illness symptoms: VOMITING, DIARRHEA, JAUNDICE - Excludes them from the retail food establishment SORE THROAT with FEVER, INFECTED WOUND & or Pustular Boil - Restricts them from the food preparation area. The Procedure to remove the Restrictions: NOTIFY the person in charge AND following DIARRHEA or VOMITING REMAIN HOME, SYMPTOM FREE for at least 24 HOURS. Correction Made: Observed following instruction the food employee(s) are aware of the five illness symptoms, their associated restrictions, the means to remove the restrictions and requirement to inform the person in charge
- General violation description:
- 2-201.11 - material provided.
|
12/20/2011 | Routine Inspection |
- Critical:
- Items:
- In house prepared ready-to-eat potentially hazardous food(s)
- Locations:
- reach in cooler(s)
- Problems:
- Without date of consumption marking
- Corrections:
- Provide proper date marks as stated above.
- Comment:
- Potentially hazardous foods shall be date marked after opening bulk package,ham in reach in cooler observed without date marking. The day when ham is opened shall be counted as day #1.Discard after 7 days,ham was date marked =corrected
- General violation description:
- 3-501.17 - (A) Except as specified in (E) of this section, refrigerated, READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared and held refrigerated for more than 24 hours in a FOOD ESTABLISHMENT shall be clearly marked at the time of preparation to indicate the date by which the FOOD shall be consumed which is, including the day of preparation: (1) 7 calendar days or less from the day that the FOOD is prepared, if the FOOD is maintained at 5C (41F) or less
- Critical: Ready-to-Eat Food, Date Markin
- Items:
- In house prepared ready-to-eat potentially hazardous food(s)
- Locations:
- reach in cooler(s)
- Problems:
- Without date of consumption marking
- Corrections:
- Provide proper date marks as stated above.
- Comment:
- Potentially hazardous foods shall be date marked after opening bulk package,ham in reach in cooler observed without date marking. The day when ham is opened shall be counted as day #1.Discard after 7 days,ham was date marked =corrected
- General violation description:
- 3-501.17 - (A) Except as specified in (E) of this section, refrigerated, READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared and held refrigerated for more than 24 hours in a FOOD ESTABLISHMENT shall be clearly marked at the time of preparation to indicate the date by which the FOOD shall be consumed which is, including the day of preparation: (1) 7 calendar days or less from the day that the FOOD is prepared, if the FOOD is maintained at 5C (41F) or less
- Items:
- Thermometer(s)
- Locations:
- reach in cooler(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- No ambient temperature thermometer was found in reach in cooler-front service area. Provide an ambient thermometer for this unit
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
- Items:
- Outer opening(s)
- Problems:
- Not sealed to prevent pest entry
- Corrections:
- Seal to prevent pest entry.
- Comment:
- All outer openings shall be protected against insects/vermin entry. Install new treshold door sweep to eliminate large gap under the back exit door .Correct in 6 months.
- General violation description:
- 6-202.15 - (A) Except as specified in ## (B), (C), and (E) and under # (D) of this section, outer openings of a FOOD ESTABLISHMENT shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
- Outer Openings, Protected
- Items:
- Outer opening(s)
- Problems:
- Not sealed to prevent pest entry
- Corrections:
- Seal to prevent pest entry.
- Comment:
- All outer openings shall be protected against insects/vermin entry. Install new treshold door sweep to eliminate large gap under the back exit door .Correct in 6 months.
- General violation description:
- 6-202.15 - (A) Except as specified in ## (B), (C), and (E) and under # (D) of this section, outer openings of a FOOD ESTABLISHMENT shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
- Temperature Measuring Devices
- Items:
- Thermometer(s)
- Locations:
- reach in cooler(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- No ambient temperature thermometer was found in reach in cooler-front service area. Provide an ambient thermometer for this unit
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
|
11/29/2010 | Routine Inspection |
- Critical: Hot and cold holding
- Comment:
- CORRECTED. ALL FOODS IN THE PIZZA PREP COOLER OBSERVED AT 41F OR BELOW. THE AIR TEMPERATURE OF THE COOLER OBSERVED AT 39F.
- General violation description:
- 3-501.16 - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained: (A) At 60C (140F) or above, except that roasts cooked to a temperature and for a time specified under 3-401.11(B) or reheated as specified in 3-403.11(E) may be held at a temperature of 54C (1300F)
|
11/04/2009 | Follow-up |
- Critical: Hot and cold holding
- Items:
- Cold food item(s)
- Locations:
- Pizza prep refrigerated unit(s)
- Problems:
- Stored above 41 degrees f
- Corrections:
- Store below 41 degrees F.
- Comment:
- OBSERVED THE FOLLOWING POTENTIALLY HAZARDOUS FOODS STORED ABOVE 41F IN THE PIZZA PREP TABLE: -PEPPERONI AT 50F -GROUND BEEF 50F -ITALIAN SAUSAGE 53F -HAM 51F COLD POTENTIALLY HAZARDOUS FOODS MUST BE HELD AT 41 F OR BELOW. DISCARD FOODS THAT HAVE BEEN ABOVE 41F FOR MORE THAN 4 HOURS. COMPLIANCE WILL BE CONFIRMED AT A FOLLOW-UP INSPECTION TO BE CONDUCTED WITHIN 10 DAYS.,
- General violation description:
- 3-501.16 - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained: (A) At 60C (140F) or above, except that roasts cooked to a temperature and for a time specified under 3-401.11(B) or reheated as specified in 3-403.11(E) may be held at a temperature of 54C (1300F)
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Locations:
- Pizza prep refrigerated unit(s)
- Problems:
- Do not meet requirements of rule
- Corrections:
- Repair/replace to meet requirements of rule.
- Comment:
- AIR TEMPERATURE IN PIZZA PREP COOLER OBSERVED AT 46F. ADJUST OR REPAIR COOLER TO MAINTAIN AIR TEMPERATURE OF 37-38F IN ORDER TO HOLD FOOD AT 41F OR BELOW.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
|
10/29/2009 | Routine Inspection |
| No violation noted during this evaluation. | 04/16/2009 | Routine Inspection |
| No violation noted during this evaluation. | 10/07/2008 | Routine Inspection |
Restaurant representatives - add corrected or new information about Amicos Pizzeria Inc, 28422 Joy, Livonia, MI 48150 »