- Floors, Walls, and Ceilings
- Items:
- Ceiling(s)
- Locations:
- ceiling
- Problems:
- Not constructed, designed, installed to be
- Corrections:
- Repair/replace to be smooth and easily cleanable.
- Comment:
- CEILING TILES MISSING NEXT TO OVEN ARE MISSING. ALL CEILING SHALL BE IN PROPER CONDITION. INSTALL MISSING CEILING TILES IMMEDIATELY.
- General violation description:
- 6-201.11 - Except as specified under # 6-201.14 and except for antislip floor coverings or applications that may be used for safety reasons, floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are SMOOTH and EASILY CLEANABLE.
|
10/01/2014 | Routine |
- Critical: Food Temperature Measuring Dev
- Comment:
- CORRECTED BY PROVIDING PROBE THERMOMETERS.
- General violation description:
- 4-302.12 - (A) FOOD TEMPERATURE MEASURING DEVICES shall be provided and readily accessible for use in ensuring attainment and maintenance of FOOD temperatures as specified under Chapter 3. (Pf) (B) A TEMPERATURE MEASURING DEVICE with a suitable small-diameter probe that is designed to measure the temperature of thin masses shall be provided and readily accessible to accurately measure the temperature in thin FOODS such as MEAT patties and FISH filets. (Pf)
- Critical: Hand Drying Provision
- Comment:
- CORRECTED BY PROVIDING PAPER TOWEL AT HANDWASH SINKS.
- General violation description:
- 6-301.12 - Each HANDWASHING SINK or group of adjacent HANDWASHING SINKS shall be provided with: (A) Individual, disposable towels
- Critical: Handwashing Cleanser, Availabi
- Comment:
- CORRECTED BY PROVIDING SOAP AT HANDWASH SINKS.
- General violation description:
- 6-301.11 - Each HANDWASHING SINK or group of 2 adjacent HANDWASHING SINKS shall be provided with a supply of hand cleaning liquid, powder, or bar soap.(Pf)
- Critical: Sanitizing Solutions, Testing
- Comment:
- CORRECTED BY PROVIDING QUATERNARY TEST STRIPS.
- General violation description:
- 4-302.14 - A test kit or other device that accurately measures the concentration in MG/L of SANITIZING solutions shall be provided. (Pf)
- Critical: Temperature Measuring Devices
- Comment:
- CORRECTED BY PROVIDING THERMOMETERS IN COOLERS.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
- Contents of the Plans and Spec
- Comment:
- CORRECTED BY PROVIDING SHELVING.
- General violation description:
- 8-201.12 - The plans and specifications for a food establishment, including a food establishment specified under # 8-201.13, shall include, as required by the regulatory authority based on the type of operation, type of food preparation, and foods prepared, the following information to demonstrate conformance with Code provisions: (A) Intended menu
- Fixed Equipment, Spacing or Se
- Comment:
- CORRECTED BY CAULKING COUNTERS TO THE WALLS.
- General violation description:
- 4-402.11 - (A) EQUIPMENT that is fixed because it is not EASILY MOVABLE shall be installed so that it is: (1) Spaced to allow access for cleaning along the sides, behind, and above the EQUIPMENT
- Floor and Wall Junctures, Cove
- Comment:
- CORRECTED BY INSTALLING COVE BASE.
- General violation description:
- 6-201.13 - (A) In FOOD ESTABLISHMENTS in which cleaning methods other than water flushing are used for cleaning floors, the floor and wall junctures shall be coved and closed to no larger than 1 mm (one thirty-second inch). (B) The floors in FOOD ESTABLISHMENTS in which water flush cleaning methods are used shall be provided with drains and be graded to drain, and the floor and wall junctures shall be coved and SEALED.
- Good Repair and Proper Adjustm
- Comment:
- CORRECTED BY TURNING COOLERS ON.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Handwashing Signage
- Comment:
- CORRECTED BY POSTING HANDWASH SIGNS AT SINKS.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Surface Characteristics
- Comment:
- CORRECTED BY INSTALLING SMOOTH AND EASILY CLEANABLE CEILING TILES.
- General violation description:
- 6-101.11 - (A) Except as specified in # (B) of this section, materials for indoor floor, wall, and ceiling surfaces under conditions of normal use shall be: (1) SMOOTH, durable, and EASILY CLEANABLE for areas where FOOD ESTABLISHMENT operations are conducted
|
08/26/2014 | Follow-up |
Restaurant representatives - add corrected or new information about Canton Preparatory High Schoool, 46610 Cherry Hill Rd, Canton Twp, MI 48188 »