- Critical: Characteristics
- Items:
- Food-contact surface(s) and utensils
- Problems:
- Constructed from materials that are not
- Corrections:
- Provide smooth, durable, non-absorbent, easily cleanable materials.
- Comment:
- Observed a Pepsi cooler used for storing raw chicken. A yellow label inside the cooler states it is unapproved for perishable food and is not NSF approved. Discontinue using this cooler for food storage. Provide an NSF approved food storage cooler.
- General violation description:
- 4-101.11 - Materials that are used in the construction of UTENSILS and FOOD-CONTACT SURFACES of EQUIPMENT may not allow the migration of deleterious substances or impart colors, odors, or tastes to FOOD and under normal use conditions shall be: (A) Safe
- Critical: Equipment, Food-Contact Surfac
- Items:
- Food-contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed soiled can opener blade and holder. Food contact equipment must be kept clean. Clean to sight and touch on a daily basis.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Critical: Hot Water and Chemical
- Items:
- Chlorine solution
- Problems:
- Not immersed in
- Corrections:
- Completely submerse equipment/utensil.
- Comment:
- Observed dishwasher not sanitizing the can opener after washing and rinsing. Equipment and utensils must be washed, rinsed and sanitized in order. Fill the 3 compartment sink to wash, rinse and then sanitize with 200 ppm of quaternary ammonia.
- General violation description:
- 4-703.11 - After being cleaned, EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be SANITIZED in: (A) Hot water manual operations by immersion for at least 30 seconds and as specified under 4-501.111
- Critical: Temperature Measuring Devices,
- Items:
- Thermometer(s)
- Problems:
- Not accurate
- Corrections:
- Calibrate to requirement above.
- Comment:
- Observed broken metal stem food thermometer. Thermometers must be accurate. Replace with a new calibrated metal stem food thermometer.
- General violation description:
- 4-203.11 - (A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1°C in the intended range of use. (Pf) (B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2°F in the intended range of use. (Pf)
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed the following soiled items: floor under the Hobart Mixer, restroom floor, toilet and handsink. Facilities must be kept clean. Clean to sight and touch on a daily basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Designated Areas
- Items:
- Locker(s)/employee storage area(s)
- Problems:
- Contaminates
- Corrections:
- Relocate to a designated area that does not contaminate items or surfaces.
- Comment:
- Observed employee coats stored on supply shelf unit. Provide a coat rack for employees to hang coats on.
- General violation description:
- 6-403.11 - (A) Areas designated for EMPLOYEES to eat, drink, and use tobacco shall be located so that FOOD, EQUIPMEBT, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES are protected from contamination. (B) Lockers or other suitable facilities shall be located in a designated room or area where contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES can not occur.
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed loose caulk hanging down from inside of left door on pizza prep cooler. Equipment must be maintained. Replace with new caulk.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed dried flour on the base of the Hobart mixer. Non-food contact areas of equipment must be kept clean. Clean to sight and touch on a daily basis.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Temperature Measuring Devices
- Items:
- Thermometer(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed missing thermometer for the pizza prep cooler. Provide a conspicuous thermometer in this cooler.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
|
02/13/2015 | Routine |
- Critical: Separation
- Comment:
- CORRECTED: CHEMICALS AND DISPENSERS HAVE BEEND REMOVED FROM ABOVE CLEAN DISHES. A SEPARATE STORAGE SHELF HAS BEEN PROVIDED FOR THE STORAGE CHEMICALS.
- General violation description:
- 7-201.11 - POISONOUS OR TOXIC MATERIALS shall be stored so they can not contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES by: (A) Separating the POISONOUS OR TOXIC MATERIALS by spacing or partitioning
- Food Storage
- Comment:
- CORRECTED: ADDITIONAL 8' OF DRY STORAGE RACKS HAVE BEEN PROVIDED FOR THE PROPER STORAGE OF DRY GOODS.
- General violation description:
- 3-305.11 - (A) Except as specified in ## (B) and (C) of this section, FOOD shall be protected from contamination by storing the FOOD: (1) In a clean, dry location
- Good Repair and Proper Adjustm
- Comment:
- CORRECTED: THE WOODEN BAKERY TABLE HAS BEEN SANDED AND OILED
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Maintaining Premises, Unnecess
- Comment:
- CORRECTED: CONSTRUCTION MATERIALS, DEBRIS AND TOOLS HAVE BEEN REMOVED FROM THE FACILITY
- General violation description:
- 6-501.114 - The PREMISES shall be free of: (A) Items that are unnecessary to the operation or maintenance of the establishment such as EQUIPMENT that is nonfunctional or no longer used
- Nonfood-Contact Surfaces
- Comment:
- CORRECTED: 1. PROTECTIVE STICKERS HAVE BEEN REMOVED FROM EQUIPMENT 2. SHELF BRACKETS HAVE BEEN REMOVED 3. WOOD SHELF SUPPORTS HAVE BEEN PAINTED AND SEALED 4. SCREWS FOR THE PREP SINK HAVE BEEN REPLACED 5. THE SOUP WELL COUNTER HAS BEEN REPAIRED.
- General violation description:
- 4-202.16 - NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
|
12/17/2014 | Follow-up |
Restaurant representatives - add corrected or new information about Captain Crust #2, 27609 Plymouth Rd, Livonia, MI 48150 »