- Critical: Backflow Prevention
- Comment:
- CORRECTED: THE WALK-IN COOLER DRAIN LINE HAS BEEN AIR GAPPED.
- General violation description:
- 5-402.11 - (A) Except as specified in (B) and (C) of this section, a direct connection may not exist between the SEWAGE system and a drain originating from EQUIPMENT in which FOOD, portable EQUIPMENT, or UTENSILS are placed. (B) If allowed by LAW, a WAREWASHING machine may have a direct connection between its waste outlet and a floor drain when the machine is located within 1.5 m (5 feet) of a trapped floor drain and the machine outlet is connected to the inlet side of a properly vented floor drain trap. (C) If allowed by LAW, a WAREWASHING or culinary sink may have a direct connection.
- Critical: Handwashing Sinks
- Comment:
- CORRECTED: THE FOOD SLICER HAS BEEN MOVED AND IS NOW LOCATED IN THE PREP AREA NEAR A HAND WASH STATION.
- General violation description:
- 5-204.11 - Placement A handwashing facility shall be located: (A) To allow convenient use by EMPLOYEES in FOOD preparation, FOOD dispensing, and WAREWASHING areas
- Critical: Temperature Measuring Devices
- Comment:
- CORRECTED: THERMOMETERS HAVE BEEN PROVIDED FOR ALL COLD HOLD UNITS.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
- Good Repair and Proper Adjustm
- Comment:
- CORRECTED: THE REACH-IN FREEZER HAS BEEN REPAIRED IS HOLD PROPER TEMPERATURES
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Handwashing Signage
- Comment:
- CORRECTED: HAND WASH SIGNAGE HAS BEEN PROVIDED FOR ALL HAND WASH STATIONS.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Toilet Rooms, Enclosed
- Comment:
- CORRECTED: THE RESTROOM DOOR HAS BEEN PROVIDED WITH A SELF CLOSING DEVICE.
- General violation description:
- 6-202.14 - Except where a toilet room is located outside a FOOD ESTABLISHMENT and does not open directly into the FOOD ESTABLISHMENT such as a toilet room that is provided by the management of a shopping mall, a toilet room located on the PREMISES shall be completely enclosed and provided with a tight-fitting and self-closing door.
|
04/20/2015 | Follow-up |
Restaurant representatives - add corrected or new information about T.L. Pizza Llc (Benitos Pizza), 22267 Goddard Rd, Taylor, MI 48180 »