- Critical: Temperature Measuring Devices,
- Items:
- Thermometer(s)
- Problems:
- Not accurate
- Corrections:
- Calibrate to requirement above.
- Comment:
- Observed broken thermometer in the milk cooler at front counter. It was replaced with a new thermometer in my presence. Violation corrected. Fill out a risk control plan and return a copy to the inspector during the revisit.
- General violation description:
- 4-203.11 - (A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1°C in the intended range of use. (Pf) (B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2°F in the intended range of use. (Pf)
- Cleaning, Frequency and Restri
- Items:
- Physical facilities/structures
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed soiled mop sink drain and women's restroom with toilet paper on floor. Facilities must be kept clean. Clean on a daily basis.
- General violation description:
- 6-501.12 - (A) PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean. (B) Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing.
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed heat lamps above the fryer bins with grease and dust on surfaces. Non-food contact equipment must be kept clean. Clean to sight and touch on a weekly basis.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
- Rinsing Procedures
- Items:
- Washed equipment/utensil(s)
- Problems:
- Not rinsed
- Corrections:
- Provide distinct clear water rinse after washing and before sanitizing.
- Comment:
- Observed food debris in the rinse water of the 3 compartment sink. Rinse water must be clear and free of food debris. The sink was drained in my presence, cleaned and refilled with clean rinse water. Violation corrected.
- General violation description:
- 4-603.16 - Washed UTENSILS and EQUIPMENT shall be rinsed so that abrasives are removed and cleaning chemicals are removed or diluted through the use of water or a detergent-sanitizer solution by using one of the following procedures: (A) Use of a distinct, separate water rinse after washing and before SANITIZING if using: (1) A 3-compartment sink, (2) Alternative manual WAREWASHING EQUIPMENT equivalent to a 3- compartment sink as specified in # 4-301.12(C), or (3) A 3-step washing, rinsing, and SANITIZING procedure in a WAREWASHING system for CIP EQUIPMENT
|
10/01/2014 | Routine |
| No violation noted during this evaluation. | 09/30/2013 | Follow-up |
- Critical: Temperature Measuring Devices,
- Items:
- Thermometer(s)
- Problems:
- Not accurate
- Corrections:
- Calibrate to requirement above.
- Comment:
- Observed metal stem thermometer not accurate. Thermometers must be accurate. Repair or replace the thermometer.
- General violation description:
- 4-203.11 - (A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1°C in the intended range of use. (Pf) (B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2°F in the intended range of use. (Pf)
- Critical: Temperature Measuring Devices,
- Items:
- Thermometer(s)
- Problems:
- Not accurate
- Corrections:
- Calibrate to requirement above.
- Comment:
- Observed metal stem thermometer not accurate. Thermometers must be accurate. Repair or replace the thermometer.
- General violation description:
- 4-203.11 - (A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1°C in the intended range of use. (Pf) (B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2°F in the intended range of use. (Pf)
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed water leaking from the hot water handle on the 3 compartment sink. Equipment must be maintained. Repair the handle to eliminate the leak.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- Observed water leaking from the hot water handle on the 3 compartment sink. Equipment must be maintained. Repair the handle to eliminate the leak.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing sign for the handsink at the drive-thru window. Provide a handwashing sign.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Handwashing Signage
- Items:
- Handwashing signage
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no handwashing sign for the handsink at the drive-thru window. Provide a handwashing sign.
- General violation description:
- 6-301.14 - A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.
- Temperature Measuring Devices
- Items:
- Thermometer(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no thermometer in the salad cooler at the drive-thru window. Provide a conspicuous thermometer in this cooler.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
- Temperature Measuring Devices
- Items:
- Thermometer(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- Observed no thermometer in the salad cooler at the drive-thru window. Provide a conspicuous thermometer in this cooler.
- General violation description:
- 4-204.112 - (A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. (B) Except as specified in # (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURNG DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars. (D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable. (E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1°C or 2°F in the intended range of use.(Pf)
|
09/17/2013 | Routine |
- Critical: Potentially Hazardous Food (Ti
- Items:
- Cold food item(s)
- Problems:
- Stored above 41 degrees f
- Corrections:
- Store below 41 degrees F.
- Comment:
- The Cheese Sauce and the Mushroom Cheese Sauce were at 117 and 103f respectively. Hot potentially hazardous food shall be maintained above 135f. Toxin production or bacterial growth may occur if the phf is in the danger zone (41f-135) for more than 4 hours. The operator reheated them in the microwave oven and noticed about 175f on both of them and were placed on the warmer. The operator is planning to check the temperatures frequently. Violation was corrected at the time of inspection by reheating the phf to 165f.
- General violation description:
- 3-501.16 - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained: (A) At 60C (140F) or above, except that roasts cooked to a temperature and for a time specified under 3-401.11(B) or reheated as specified in 3-403.11(E) may be held at a temperature of 54C (1300F)
|
10/05/2012 | Routine |
- Critical: Hot and cold holding
- Comment:
- THE COOLER WAS AT 38F AND THE MONTEREY JACK CHEESE WAS AT 41F. VIOLATION HAD BEEN CORRECTED. FAN ON THE ROOF WAS CHANGED.
- General violation description:
- 3-501.16 - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained: (A) At 60C (140F) or above, except that roasts cooked to a temperature and for a time specified under 3-401.11(B) or reheated as specified in 3-403.11(E) may be held at a temperature of 54C (1300F)
|
11/22/2011 | Follow-up |
- Critical: Hot and cold holding
- Comment:
- INITIALLY THE COOLER WAS AT 45F AND THE CHEESE WAS AT 45F. THE MANAGER MENTIONED THAT FOOD CHANGED RECENTLY. SHE SHOWED THAT THE COOLER TEMPERATURE CAME DOWN TO 36 AND THE CUT TOMATOES WERE AT 41F AND THE CHEESE STILL WAS AT 45F. A FOLLOW UP INSPECTION WILL BE CONDUCTED WITH IN 10 DAYS.,
- General violation description:
- 3-501.16 - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained: (A) At 60C (140F) or above, except that roasts cooked to a temperature and for a time specified under 3-401.11(B) or reheated as specified in 3-403.11(E) may be held at a temperature of 54C (1300F)
|
11/14/2011 | Follow-up |
- Critical: Hot and cold holding
- Items:
- Cold food item(s)
- Problems:
- Stored above 41 degrees f
- Corrections:
- Store below 41 degrees F.
- Comment:
- THE 2 DOOR IN RAIL COOLER WAS AT 61 F AND THE FETA CHEESE WAS AT 53F. POTENTIALLY HAZARDOUS FOOD SHALL BE STORED UNDER 41F. DISCARD ALL THE PHF ITEMS THAT ARE ABOVE 41F AND STORED FOR MORE THAN 4 HOURS. A FOLLOW UP INSPECTION WILL BE CONDUCTED WITH IN 10 DAYS., ,
- General violation description:
- 3-501.16 - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained: (A) At 60C (140F) or above, except that roasts cooked to a temperature and for a time specified under 3-401.11(B) or reheated as specified in 3-403.11(E) may be held at a temperature of 54C (1300F)
- Good Repair and Proper Adjustm
- Items:
- Equipment
- Problems:
- In poor repair
- Corrections:
- Repair/replace.
- Comment:
- WATER HAS ACCUMULATE IN THE SINGLE DOOR IN RAIL COOLER AT THE END OF THE LINE.. NO FOOD WAS STORED. MAKE SURE WATER IS DRAINED PROPERLY TO PREVENT MOLD GROWTH.
- General violation description:
- 4-501.11 - (A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.
- Thawing
- Items:
- Frozen food(s) for thawing
- Problems:
- Stored above 41 degrees f thawed or partially thawed
- Corrections:
- Store under refrigeration.
- Comment:
- FRENCH FRIES PACKAGES WERE STORED UNDER THE CABINET. AS PER THE MANAGER IT WAS NOT A COOLER OR A FREEZER. IT WAS AT 46F AND THE FRENCH FRIES WERE AT 40F. PROPER WAY TO THAW THEM IS BY STORING IN A REFRIGERATOR.
- General violation description:
- 3-501.13 - Except as specified in # (D) of this section, POTENTIALLY HAZARDOUS FOOD (TIME/TEMPERATURE CONTROL FOR SAFETY FOOD) shall be thawed: (A) Under refrigeration that maintains the FOOD temperature at 5°C (41°F) or less
|
11/04/2011 | Routine Inspection |
| No violation noted during this evaluation. | 11/12/2010 | Routine Inspection |
- Critical: Clean Sight/Touch-No Accum/Enc
- Comment:
- The ice machine has been cleaned and sanitized according to the manufacturer's instruction. Corrected.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
|
12/01/2009 | Follow-up |
- Critical: Clean Sight/Touch-No Accum/Enc
- Items:
- Food-contact surface(s) Equipment
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed pink and black mold growth on the upper and lower components of the ice machine. Remove all components and clean and sanitize them according to the manufacturer's instruction. A follow up inspection will be conducted within 10 days to confirm compliance.,
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Clean Freq, Nonfood-Contact Su
- Items:
- Nonfood contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- Observed greasy residue on the small food scale. No food directly touches this surface. Keep non-food contact surfaces of equipment clean.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
|
11/16/2009 | Routine Inspection |
Restaurant representatives - add corrected or new information about Wendys, 17899 Haggerty, Northville, MI 48167 »