- Critical: Equipment, Food-Contact Surfac
- Comment:
- FOOD CONTACT SURFACES OF EQUIPMENT CLEANED AND SANITIZED.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Food Storage
- Comment:
- NO FOOD ITEMS STORED ON FLOOR.
- General violation description:
- 3-305.11 - (A) Except as specified in ## (B) and (C) of this section, FOOD shall be protected from contamination by storing the FOOD: (1) In a clean, dry location
- Nonfood-Contact Surfaces
- Comment:
- NON-FOOD CONTACT SURFACES OF EQUIPMENT CLEANED.
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
|
11/24/2014 | Follow-up |
- Critical: Equipment, Food-Contact Surfac
- Items:
- Food-contact surface(s) Equipment
- Locations:
- Ice machine(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- INTERIOR SURFACE OF ICE MACHINE MOLDY BEHIND FRONT PANEL.,
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Food Storage
- Items:
- Food item(s) in storage
- Locations:
- Storage area
- Problems:
- Stored on floor or less than 6 inches above floor
- Corrections:
- Store at least 6 inches above the floor.
- Comment:
- CASE OF CHIPS STORED DIRECTLY ON FLOOR IN STORAGE AREA. ,
- General violation description:
- 3-305.11 - (A) Except as specified in ## (B) and (C) of this section, FOOD shall be protected from contamination by storing the FOOD: (1) In a clean, dry location
- Nonfood-Contact Surfaces
- Items:
- Nonfood contact surface(s)
- Locations:
- reach-in freezer(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- SHELVES ON REACH-IN FREEZER DOOR SOILED.,
- General violation description:
- 4-602.13 - NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.
|
11/06/2014 | Routine |
- Critical: Handwashing Cleanser, Availabi
- Items:
- Soap
- Locations:
- kitchen handsink(s)
- Problems:
- Not provided
- Corrections:
- Provide.
- Comment:
- SOAP PROVIDED AT EACH HANDSINK.
- General violation description:
- 6-301.11 - Each HANDWASHING SINK or group of 2 adjacent HANDWASHING SINKS shall be provided with a supply of hand cleaning liquid, powder, or bar soap.(Pf)
- Critical: Ready-to-Eat, Potentially Haza
- Items:
- Commercially processed ready to eat potentially hazardous food(s)
- Locations:
- walk-in cooler(s)
- Problems:
- Without date of consumption marking
- Corrections:
- Provide proper date marks as stated above.
- Comment:
- OPEN PACKAGE OF HOT DOGS, ETC. STORED WITHOUT A CONSUME BY DATE INSIDE THE WALK-IN COOLER., ALL POTENTIALLY HAZARDOUS READY TO EAT FOODS PROVIDED WITH A CONSUME BY DATE NOT TO EXCEED A TOTAL OF 7 DAYS.
- General violation description:
- 3-501.17 - (A) Except as specified in (E) of this section, refrigerated, READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared and held refrigerated for more than 24 hours in a FOOD ESTABLISHMENT shall be clearly marked at the time of preparation to indicate the date by which the FOOD shall be consumed which is, including the day of preparation: (1) 7 calendar days or less from the day that the FOOD is prepared, if the FOOD is maintained at 5C (41F) or less
- Cleaning Ventilation Systems,
- Items:
- Ventilation system
- Locations:
- kitchen ventilation hood filter(s)
- Problems:
- Not clean
- Corrections:
- Keep clean
- General violation description:
- 6-501.14 - (A) Intake and exhaust air ducts shall be cleaned and filters changed so they are not a source of contamination by dust, dirt, and other materials. (B) If vented to the outside, ventilation systems may not create a public health HAZARD or nuisance or unLAWful discharge.
- Light Bulbs, Protective Shield
- Items:
- Light shielding
- Locations:
- walk-in cooler(s)
- Problems:
- Not provided
- Corrections:
- Provide adequate light shields and end caps or shatter-proof bulbs.
- General violation description:
- 6-202.11 - (A) Except as specified in # (B) of this section, light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed FOOD
- System Maintained in Good Repa
- Items:
- Plumbing system
- Locations:
- kitchen 3-compartment sink faucet
- Problems:
- Not maintained
- Corrections:
- Maintain in good repair
- Comment:
- 3-COMPARTMENT SINK FAUCET LEAKING AT FAUCET EXTENSION JOINT - REPAIR.
- General violation description:
- 5-205.15 - A PLUMBING SYSTEM shall be: (A) Repaired according to LAW
- Wiping Cloths, Use Limitation
- Items:
- Wiping cloth(s)
- Locations:
- bar
- Problems:
- Not completely submerged in sanitizing solution
- Corrections:
- Store wiping cloths completely submersed in sanitizer.
- General violation description:
- 3-304.14 - (A) Cloths in-use for wiping food spills from TABLEWARE and carry-out containers that occur as FOOD is being served shall be: (1) Maintained dry
|
11/05/2013 | Routine |
| No violation noted during this evaluation. | 11/15/2012 | Routine |
| No violation noted during this evaluation. | 11/08/2011 | Routine Inspection |
- Critical: Clean Sight/Touch-No Accum/Enc
- Comment:
- Corrective Actions Observed: Cited FOOD CONTACT SURFACES HAVE BEEN CLEANED AND SANITIZED.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Junctures, Coved/Enclosed/Seal
- Comment:
- COVED BASED MOLDING REPLACED.
- General violation description:
- 6-201.13 - (A) In FOOD ESTABLISHMENTS in which cleaning methods other than water flushing are used for cleaning floors, the floor and wall junctures shall be coved and closed to no larger than 1 mm (one thirty-second inch). (B) The floors in FOOD ESTABLISHMENTS in which water flush cleaning methods are used shall be provided with drains and be graded to drain, and the floor and wall junctures shall be coved and SEALED.
- Light Bulbs, Protective Shield
- Comment:
- COMPLIANT 6-301.14 Protective light shields are in place as needed.
- General violation description:
- 6-202.11 - (A) Except as specified in # (B) of this section, light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed FOOD
|
11/24/2010 | Follow-up |
- Critical: Clean Sight/Touch-No Accum/Enc
- Items:
- Food-contact surface(s) Equipment
- Locations:
- Facility
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- FOOD CONTACT SURFACES OF EQUIPMENT SOILED: 1) INTERIOR SURFACE OF ICE MACHINE SOILED BEHIND FRONT PANEL 2) CAN OPENER IN KITCHEN,
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
- Junctures, Coved/Enclosed/Seal
- Items:
- Floor(s)
- Locations:
- UPPER LEVEL women's restroom
- Problems:
- Not coved
- Corrections:
- Install coving
- Comment:
- MISSING COVED BASED MOLDING INSIDE UPSTAIRS WOMEN'S RESTROOM.,
- General violation description:
- 6-201.13 - (A) In FOOD ESTABLISHMENTS in which cleaning methods other than water flushing are used for cleaning floors, the floor and wall junctures shall be coved and closed to no larger than 1 mm (one thirty-second inch). (B) The floors in FOOD ESTABLISHMENTS in which water flush cleaning methods are used shall be provided with drains and be graded to drain, and the floor and wall junctures shall be coved and SEALED.
- Light Bulbs, Protective Shield
- Items:
- Light shielding
- Locations:
- Storage Room(s)
- Problems:
- Not provided
- Corrections:
- Provide adequate light shields and end caps or shatter-proof bulbs.
- General violation description:
- 6-202.11 - (A) Except as specified in # (B) of this section, light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed FOOD
|
11/09/2010 | Routine Inspection |
- Critical: Clean Sight/Touch-No Accum/Enc
- Comment:
- INTERIOR OF ICE MACHINE AND POP GUN ARE CLEAN TO SIGHT AND TOUCH. VIOLATION CORRECTED.
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
|
12/02/2009 | Follow-up |
- Critical: Clean Sight/Touch-No Accum/Enc
- Items:
- Food-contact surface(s)
- Problems:
- Soiled
- Corrections:
- Keep clean.
- Comment:
- INTERIOR OF ICE MACHINE, POP GUN AT MAIN BAR HAS SOME MOLD GROWTH. FOOD CONTACT SURFACES MUST BE CLEAN TO SIGHT AND TOUCH. WASH, RINSE, AND SANITIZE ICE MACHINE AND POP GUN. CORRECT IMMEDIATELY, WILL RETURN ON/ABOUT 12-1-09 TO VERIFY COMPLIANCE.,
- General violation description:
- 4-601.11 - (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch. (B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. N (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. N
|
11/20/2009 | Routine Inspection |
- Critical: Backflow prevention
- Items:
- Backflow/backsiphonage prevention device(s)
- Problems:
- Not provided on
- Corrections:
- Provide adequate air gap.
- Comment:
- AN AIR GAP WAS NOT PRESENT BETWEEN THE END OF THE BAR ICE BIN (LOCATED IN THE BANQUET HALL ADJACENT TO THE DISH MACHINE AREA) COPPER DRAIN LINE AND THE RIM OF THE FLOOR DRAIN BELOW. IN ADDITION, AN AIR GAP WAS NOT PRESENT BETWEEN THE END OF THE DRAIN LINE FROM THE BEER NOZZLE HOLDER (LOCATED AT THE MAIN BAR) AND THE RIM OF THE FLOOR DRAIN BELOW. A DIRECT CONNECTION MAY NOT EXIST BETWEEN EQUIPMENT (I.E.: ICE BIN, NOZZLE HOLDER) WHERE FOOD (I.E.: ICE) OR CLEAN EQUIPMENT (BEER NOZZLE DISPENSER) IS KEPT AND THE SEWAGE SYSTEM (I.E.: THE FLOOR DRAIN). PROVIDE AN AIR GAP BETWEEN THE ENDS OF THE DRAIN LINES NOTED ABOVE AND THE RIM OF THE FLOOR DRAINS TO WHICH THESE DRAIN LINES ARE DIRECTED. THIS IS A REPEAT CRITICAL VIOLATION. A RE-VISIT INSPECTION WILL BE CONDUCTED WITHIN 10 DAYS OR LESS TO CHECK THE STATUS OF THIS REPAIR. PLEASE COMPLETE THE RISK CONTROL PLAN PROVIDED BY THE TIME OF THE RE-VISIT INSPECTION. COMMENTS: WHEN PROVIDING AN AIR GAP FOR THESE DRAIN LINES ENSURE THAT THE MEANS USED TO CREATE THE AIR GAP IS A PERMANENT FIX. FOR EXAMPLE: IF THE AIR GAP IS CREATED BY ELEVATING THE LINE, BE SURE TO USE A PIPE HANGER, PIPE CLAMP, PIPE STRAP, A BRACKET OR SOME OTHER SUITABLE MEANS THAT WILL PERMANENTLY KEEP THE DRAIN LINE ELEVATED OVER TIME. ,
- General violation description:
- 5-402.11 - (A) Except as specified in (B) and (C) of this section, a direct connection may not exist between the SEWAGE system and a drain originating from EQUIPMENT in which FOOD, portable EQUIPMENT, or UTENSILS are placed. (B) If allowed by LAW, a WAREWASHING machine may have a direct connection between its waste outlet and a floor drain when the machine is located within 1.5 m (5 feet) of a trapped floor drain and the machine outlet is connected to the inlet side of a properly vented floor drain trap. (C) If allowed by LAW, a WAREWASHING or culinary sink may have a direct connection.
|
05/12/2009 | Routine Inspection |
Restaurant representatives - add corrected or new information about Richard S Hayes Amvets Post 57, 19730 Harper, Harper Woods, MI 48225 »